WPA+RADIUS and IAS

Discussion in 'DD-WRT Firmware' started by zweigelt, Dec 7, 2005.

  1. zweigelt

    zweigelt Guest

    Hi all,

    I got a sweet Linksys Box with DD-WRT v23 running.
    WPA-PSK works fine, but I would like to make it work with WPA-RADIUS. I have a Windows Server 2003 with AD and IAS running and tried to switch to WPA-RADIUS but I can´t get it running.

    Here is the testing setup:
    - at Linksys/Wireless/Wireless Security: WPA RADIUS with TKIP, the right IP, Port and Shared Key
    - in IAS the Linksys is active as RADIUS Client with the same Shared Key and the right IP
    - both can ping each other (same subnet)
    - connection to LAN from a Notebook with WPA-PSK, static IP and the WPA-Key works (set up just to test the rest of the settings)
    - connection to LAN from the same NB with the above WPA-RADIUS settings doesn´t, it stays in state "Authenticating"

    I tried to find information or HowTos about this problem on the internet, but with no success.

    Please help me out!
    zweigelt
     
  2. 4Access

    4Access Network Guru Member

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice