1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WPA2 Bridge or AP Client?

Discussion in 'Other Linksys Equipment' started by press250, Aug 31, 2005.

  1. press250

    press250 Network Guru Member

    I am looking for a WPA2-capable bridge or AP Client ... any suggestions?

    Here's the background ... WRT54GS wired to two PCs and serves as the wireless AP for a notebook. So far, nice and simple. I also have a vintage TiVO (Series 1) to which I've added a wired ethernet port. I need to connect the TiVO via wireless.

    At present, I have an old Netgear bridge which does the job, but only supports WEP. I'd like to run the entire wireless network on WPA2, but I cannot seem to find a solution to connect to the TiVO -- none of the bridges I know of support WPA2.

    Any suggestions would be appreciated!
  2. howardp6

    howardp6 Network Guru Member

    According to the WiFi Org website the WAP54Gv2 is supposed to support WPA2, but that may only be as a access point and not bridge or access point client. I would check with the Linksys Technical Support to determine if it works with WPA2 in bridge or client mode.

Share This Page