1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

wpc54g-disable

Discussion in 'Other Linksys Equipment' started by bark1, Aug 13, 2006.

  1. bark1

    bark1 LI Guru Member

    Hello, I have a HP ze5170 notebook and I'm useing a wpc54g version 2 card. My problem is that after about 30 min the card quits working, it takes longer if not in use but still connected. When I try to enable it in internet connections it fails to enable, the only way it will work again is to reboot the computer then the cycle starts over! lights on the card go dead when it disables itself. sounds like a heat problem to me but the card is not hot. Thanks in advance for any advice

    Bark1
     
  2. jgutz20

    jgutz20 Network Guru Member

    is it your PCMCIA slot shutting down? is this problem happening after coming out of standby or hibernation?
     
  3. bark1

    bark1 LI Guru Member

    At first I thought that was the case, but it has done it twice while I have been useing it. I really don't know if its the card or slot I do know that when it happens the card loses both of it's activity lights and won't re-enable untill I re-boot.

    Bark1
     

Share This Page