1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WPC54g power up/out

Discussion in 'Other Linksys Equipment' started by Andy1, Mar 16, 2005.

  1. Andy1

    Andy1 Network Guru Member

    Is there a way to connect and disconnect at will from software the adaptor without extracting the card. In my thinkpad this is not possible A31. Is there a utilty which does this?
    Thanks for any input
     
  2. Esquire

    Esquire Mesquire Staff Member Member

    Not sure what you mean by connect/disconnect since the card isn't being removed? Do you mean enable/disable?
     
  3. Andy1

    Andy1 Network Guru Member

    Thanks .
    I meant the same that is available to the TP R51 from the combination keys F5 which opens a dialog box with those options.
    This is not available in my A31 so the awakening from hibernate or suspend is more complicated if you leave the card on the TP. The only solution is to extract the card by the icon safe extract.
    This using Access Conn. 3.7.
    I would like to suspend or hibernate mantaining the card but powering off or disabling the radio. This because Access Connection is good but requires the the utility of linksys to be working when you connect sometimes.
    A31 TP with linksys WMP54g
     

Share This Page