1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WPC54G V1(I Think) and WPA

Discussion in 'Other Linksys Equipment' started by fuzzer, Oct 7, 2005.

  1. fuzzer

    fuzzer Guest

    I have one of the original WPC54G cards (no version on card, assume its a v1). I am trying to connect to a linksys wireless router with WPA enabled. Is there anything I can do to make my card WPA capable?
     
  2. SteelersFANinMA

    SteelersFANinMA Network Guru Member

    I have a v1.2 and If you use the latest driver from either Linksys, Broadcom (HP - Hewlett Packard) or Dell you should be able to use WPA or WPA2 which is the new and improved version of WPA. I am currently using Broadcom 3.140.16.0 and having no problems with WPA2 AES. Check the last page in the sticky in this forum for links or Google it:

    http://www.linksysinfo.org/modules.php?name=Forums&file=viewtopic&t=3927&start=40

    Good Luck! :cool:
     
  3. SteelersFANinMA

    SteelersFANinMA Network Guru Member

    Here is the link to the latest Broadcom Driver:

    http://images.lunarpages.com/10953148.cab

    You can find this link near the bottom of the page I linked for you in the above post. It was posted by a user named somms.
     
  4. pharma

    pharma Network Guru Member

    I've got the same wireless card as you, v1.1. I've got mine working with WPA2 ... you might want to check out the thread SteelersFAinMA linked but read the entire thread ... my post is on the first page.

    The drivers you want to use are most likely the ones listed towards the end of the thread as they will be more recent ...

    If you are thinking about setting up WPA2, you might want to look at this:

    http://www.linksysinfo.org/modules.php?name=News&file=article&sid=291

    Hope this helps...
     

Share This Page