1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WPC54G Ver 4 disconnects from network when using WPA\TKIP

Discussion in 'Other Linksys Equipment' started by Iron_Jack_Kidd, Jun 8, 2005.

  1. Hi There,
    I'm running a network with a WRT54GX SRX router and a WPG54G ver 4 PC card. I recently upgraded the wireless security from WEP to WPA\TKIP. Since the upgrade I've started seeing disconnects from the network which has never happened before. The card driver version is 1.22.1.2004 and the router firmware version is 1.01.07 both of these appear to be the latest available for download. The card is running without the linksys utility using Win XP SP2 wireless zero config. The disconnects at first seemed to correspond with the group key renewal interval, but then started happening more frequently, especially during online game play. Any suggestions would be much appreciated. The following event viewer messages appear when the card disconnects and I perform a repair which usually gets the connection back.

    Event Type: Information
    Event Source: Tcpip
    Event Category: None
    Event ID: 4202
    Date: 6/7/2005
    Time: 10:38:57 PM
    User: N/A
    Computer: A51
    Description:
    The system detected that network adapter Wireless-G...ver.4.0 - Packet Scheduler Miniport was disconnected from the network, and the adapter's network configuration has been released. If the network adapter was not disconnected, this may indicate that it has malfunctioned. Please contact your vendor for updated drivers.

    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Data:
    0000: 00 00 00 00 02 00 50 00 ......P.
    0008: 00 00 00 00 6a 10 00 40 ....j..@
    0010: 02 00 00 00 00 00 00 00 ........
    0018: 00 00 00 00 00 00 00 00 ........
    0020: 00 00 00 00 00 00 00 00 ........


    Event Type: Information
    Event Source: Tcpip
    Event Category: None
    Event ID: 4201
    Date: 6/7/2005
    Time: 10:39:17 PM
    User: N/A
    Computer: A51
    Description:
    The system detected that network adapter Wireless-G...ver.4.0 - Packet Scheduler Miniport was connected to the network, and has initiated normal operation over the network adapter.

    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Data:
    0000: 00 00 00 00 02 00 50 00 ......P.
    0008: 00 00 00 00 69 10 00 40 ....i..@
    0010: 02 00 00 00 00 00 00 00 ........
    0018: 00 00 00 00 00 00 00 00 ........
    0020: 00 00 00 00 00 00 00 00 ........
     
  2. gabsil7

    gabsil7 Guest

    WMP54G Card with WAP54G Access Point

    I'm through a similar problem.
    I'm trying different encryption methods but with no success.
    When i turn off my pc it appears one exception (warning) about the WMP54Gv4.exe
    I believe that is a RAM hardware problem.
    I have followed the manual installation, uninstalled/installed several times. I have also used the XP wireless zero configuration with the same bad results. It's quite strange.
    I thought also that was the re-keying issue. I modified the time, disable it (placing 0 seg) having the same results. Event viewer filled up with ID4201


    I'm looking at the net to find any solution...

    Regards,
     
  3. Dieg

    Dieg Guest

    wondering

    I have a similar problem....any luck solving this issue?? :(
     
  4. bajo_el_agua

    bajo_el_agua LI Guru Member

    The same problem

    Hi,

    The same problem, but my WPC54G is V.2. somebody in linksys can help us?


    My operating system is in spanish Windows XP SP2.

    Tipo de suceso: Información
    Origen del suceso: Tcpip
    Categoría del suceso: Ninguno
    Id. suceso: 4201
    Fecha: 09/06/2006
    Hora: 10:07:57 p.m.
    Usuario: No disponible
    Equipo: XXXXXX
    Descripción:
    El sistema detectó que el adaptador de red \DEVICE\TCPIP_{21B47505-F5F5-43CD-AD8B-421E7D1E7998} estaba conectado en la red y ha iniciado un funcionamiento normal con dicho adaptador de red.

    Para obtener más información, vea el Centro de ayuda y soporte técnico en http://go.microsoft.com/fwlink/events.asp.
    Datos:
    0000: 00 00 00 00 02 00 50 00 ......P.
    0008: 00 00 00 00 69 10 00 40 ....i..@
    0010: 02 00 00 00 00 00 00 00 ........
    0018: 00 00 00 00 00 00 00 00 ........
    0020: 00 00 00 00 00 00 00 00 ........


    Good luck
     

Share This Page