1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WPC54GS and Print Server question

Discussion in 'Other Linksys Equipment' started by networkwasher, May 20, 2006.

  1. networkwasher

    networkwasher LI Guru Member

    Alright, I just bought a WRT54GS v5 router and still have my old Belkin 802.11b notebook adaptor cards and a 802.11b wireless print server. If I upgrade to the WPC54GS cards will I still be able to use my 802.11b print server or will I have to buy a new g-band print sever? Thanks.
     
  2. mstombs

    mstombs Network Guru Member

    A mixed network of B and G cards will work but you would get slightly better performance if you could go G-only.

    I have a WPC54GS card and am really not sure it was worth the extra over a cheaper G card. Had lots of problems with drivers and signal strength/ sensitivity issues. I did get the speedbooster to work 25Mbps real throughput vs 20Mbps with speedbooster disabled - NB if you have many wireless clients this is shared between all - not a patch on full duplex 2*100Mbps wired connections!
     

Share This Page