1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRE 54G and Wireless G Game Adapters

Discussion in 'HyperWRT Firmware' started by pcar1947, Dec 4, 2005.

  1. pcar1947

    pcar1947 Network Guru Member

    Hi I am new to the Board.

    I have a Wireless GS network setup in a 3 level house.

    The network includes the following:

    - Dell PC XP Pro as my Home Office with WRT54GS
    - Homegrown pc with Wireless G PCI Card
    - HP Pavillion ZD 7000 with built-in Wireless G
    - An old Dell in the basement with a USB G Network Adapter
    - 2 Tivos with 2 Wireless Linksys G Game Adapters w/ 10/10bt USB.
    - Finally I introduced a WRE 54 G range Expander in the hope of optimizing the network.


    Am I trying to do to much? What would cause the Game Adapters to cancel each other out?

    Any help or suggestions would be appreciated.

    Paul in the ATL



    All of the PC have benefited from the upgrade to WRE 54 g. The basement moving from a Low signal to Excellent Signal, However the TIVO's with the Game adapters have not.

    The TIVOS with the LInKsys G Game adapters continue to cancel each other out. they Stay connected for a while and then they go to an IP of 169.xxx.x.x
     
  2. pcar1947

    pcar1947 Network Guru Member

    OK disconnected the WRE and the Game Adapters work.

    What I mean by cancelling each other out is that the Game Adapters work for a moment and then each one will display all 3 led lights (Power, Ethernet and Wierless G). Typically the only time tthe Wireless G lights is on is when there is has activity and then it flickers. By hooking up the WRE the Wireless g light glows solid.

    Any help or suggestions would be appreciated
     

Share This Page