1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRE54G and WRT54G communication problems.

Discussion in 'Other Linksys Equipment' started by FrischJ, Jan 23, 2006.

  1. FrischJ

    FrischJ Network Guru Member

    Hi all. I just flashed my WRT54Gv1 to DD-WRTv23 and The WRT54G will no longer talk to the WRE54G. I've tried repeated pressing of the reset and auto config buttons. The expander will no longer respond to pings at 192.168.1.240. I can find it listed in site survey, but it will not communicate. It also lists the SSID for it as linksys****** where the * are a bunch of random letters and numbers. My router is just defult linksys for the SSID. Any idea?
     
  2. Rolla

    Rolla Network Guru Member

    I have used these and had nothing but problems! Get rid of it if you can, google and there will be ways to set it up. Do NOT use Linksys method or the autoconfig button.

    Sometimes the device does not reset. Unplug it for 15 mins, replug and hold down the reset button. Wait 15-20 secs and let it auto start and then try just logging in via IP address in the unit.
     

Share This Page