1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRK54g v1.1 v1.58.03 firmware needed

Discussion in 'Linksys Official Firmware' started by Gurra, Feb 10, 2012.

  1. Gurra

    Gurra Networkin' Nut Member

    Just opened a brand new WRK54g that has been sitting in storage for ages and it is having problems with some of the web pages - loading as blank - a factory reset doesn't fix it.
    I was going to reflash it but cisco have pulled all the firmwares from their web site.
    Does anyone have it?
  2. Gurra

    Gurra Networkin' Nut Member

    Found 1.58.03 on the net. Unfortunately it is either incompatible or the update utility prevents flashing the same version again.
    The web manager update process fails with the message "Upgrade action is not finish!! Upgrade file pattern error."
    The net version is supposed to be the US version.
    Does anyone have the Euro version?
  3. Gurra

    Gurra Networkin' Nut Member

    Found the euro version as well, WRK54GV1.1_v1.58.03_ETSI_000_code.bin. This version flashes both when using the web manager and when using the tftp utility.
    Unfortunately it doesn't fix the corrupt web pages, no combination of flashing and factory reset appears to fix it. 1 step forwards, two steps back.

Share This Page