1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRP200

Discussion in 'Other Linksys Equipment' started by tmm14, Feb 17, 2006.

  1. tmm14

    tmm14 Network Guru Member

    Does anybody know something about new Linksys device WRP200?
    It's positioned as analog of WRTP54G (descriptions are the same).
    We have few devices.They work as wireless routers properly. But we can't make any manipulation with VoIP part.The only available option for VoIP is Status page.But there are no configuration options for SIP-related parameters at all and No mention about it in UG and on Linksys site. Linksys's support keeps silence as usual. :shock:
    Google gives away only sales information. :(
    Pls help. :cry:
     
    Rajarajan likes this.
  2. tmm14

    tmm14 Network Guru Member

    To whom it may be interested, VoIP Setup page for WRP20___http://IP_Address_Of_Broadband_Router/Voice_adminPage.stm____
     
    Rajarajan likes this.
  3. mazilo

    mazilo Network Guru Member

    Is this a locked/unlocked version?
     
  4. k160

    k160 Guest

    Firmware?

    What abour firmware for WRP200? Is it the same as for WRTP54G? I can't make PPTP connection - there is no line for VPN server in WRP200 model....
     
  5. Slapstickyy

    Slapstickyy LI Guru Member

    :sad:

    Hi tmm14, am interested in Voip setup for WRP200, coz am facing same problem.
     
    Rajarajan likes this.
  6. Slapstickyy

    Slapstickyy LI Guru Member

    :sad:

    Hi tmm14, am interested in Voip setup for WRP200, coz am facing same problem.
     
  7. zamiron

    zamiron Guest

    WRP200 firmware update

    I download firmware from linksys site for device WRTP54G-NA (WRTP54G-NA_fw_3.1.17_US.zip)
    Can i update firmware WRP200 to WRTP54G-NA ?
     
    Rajarajan likes this.
  8. tmm14

    tmm14 Network Guru Member

    It seems to me you can't.
     
    Rajarajan likes this.
  9. ShyBoy

    ShyBoy Network Guru Member

    Did you ever figure it out about the firmware of WRP200?

    in my case, my WiFi devices are not connecting with this router, its not taking an ip, looks like DHCP is not assigning the IPs to wifi.

    The cable connection is fine.

    I also tried to assign the ip to the WiFi device and that worked out, and then it was connected, seems to me that it was a defective unit. I returned it and getting the new piece soon to check out exactly if that was the unit problem or not.

    I am more interested to update the firmware as this router doesn't have a port redirection which I really need it.

    can someone post the experience about using open-wrt firmware in this unit?

    Will appriciate your replies.

    thanks,
     
  10. mgomezivaldi

    mgomezivaldi LI Guru Member

    I've purchased this WRP200, I wanted to know if zamiron or anyone did have the guts to try to flash the WRP200 with the WRTP54G-NA binary (WRTP54G-NA_fw_3.1.17_US.zip), and can comment the results for all of us.
     
  11. mgomezivaldi

    mgomezivaldi LI Guru Member

    This worked perfect.

    Anyways the remote admin function will just work to show the Voice_adminPage.stm page.

    All links are embedded to point to the private router IP Address. You should try to manage the PAP2 on WRP200 from the LAN side using the default ip address at your web browser as follows:

    http://192.168.15.1/Voice_adminPage.stm
     
  12. ShyBoy

    ShyBoy Network Guru Member

    is it working fine with the Wifi devices? are the wireless devices taking IPs from router's DHCP?

    did you try to upgrade the firmware,

    worked?

    did you see any port triggering option in the router's configuration?

    appriciate your reply.
     
  13. ShyBoy

    ShyBoy Network Guru Member

    initially it should be the same as router's username/password, later on that page u can set to choose a different password.
     
  14. mgomezivaldi

    mgomezivaldi LI Guru Member

    WRP200 with firmware 1.01.07 works fine to a certain extent of time, it seems to crash after a while with UDP traffic (VoIP calls loses audio in one way), and it also cannot be remotelly managed.

    It is all solved when you unplug power and plug it back in, (reset).
    It crashes too often so its a pain.

    I did not have the guts to try to upgrade it to a WRTP54G firmware.

    I been researching and it seems that the firmware 1.01.07 brought problems on the RTP300, you can read here http://www.vonage-forum.com/ftopic16382.html about it, and that even vonage is downgrading this firmware back to version 1.00.62

    You can find a couple of firmware images to download from at http://vonage.nmhoy.net/upgrade.html

    Even though i do not know which firmware is correct for the WRP200, perhaps neither.

    Version 1.00.62 however seems to have some problems if UPnP is not activated.
     
  15. aytacakoz

    aytacakoz Addicted to LI Member

    Does anybody know something about WRP200 (in-voice) firmware?

    I didnt find anywhere, i cannot login with username =admin password=admin

    I need any firmware(binary) or password .. anybody help me?
     
  16. aytacakoz

    aytacakoz Addicted to LI Member

    anyone help me?
     

Share This Page