1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRT160n V1 Bandwidth + URL Log Per user

Discussion in 'DD-WRT Firmware' started by Light_On, Jul 26, 2012.

  1. Light_On

    Light_On Serious Server Member

    Hi All,

    I have spent 3 solid days configuring DDWRT on a wrt610nv1 (the router in the title is a different router - read on) so i can follow bandwidth data and sadly i have now fallen at the last hurdle and realy think its time to stop trying.

    In my research I have come across Tomato as a build and that Toastman and Teaman have soloutions for Bandwidth and URL Loggin per user.

    I also understand these builds are fully integrated so as such I can "flash and go" so to speak.

    I dont want to appear ungreatfull and have done some reading here but would like to appeal to anyones good nature who could kindly point me in the corect direction for such a build of Tomato by either Toastman or Teaman that I can flash on a WRT160n V1 (a spare router i have that i know works with Tomato as i know only V2 upwards is supported on wrt610n) [router models very similar so appolagies for confushion]

    Appolagies if this seems liek a cop out - but 3 days of learning linux code and extensive reading I feel I could just use a little leg up / push in the right direction.

    Many thanks in advance to any one who can help a tired techie enthusist :)
  2. Mangix

    Mangix Networkin' Nut Member

    as 4shared seems to be down, try mediafire: http://www.mediafire.com/?88t1vzzcgrphx

    look in the K2.4 section and get a firmware less than 4MB. Since you currently use dd-wrt, you do not need a tailed build but you will need to do a 30/30/30 reset after flashing in case Reset to Default Settings is broken on dd-wrt(newer builds).
  3. Light_On

    Light_On Serious Server Member

    Hi Magnix,

    many thanks for this - very kind of you to help - i am all set.


Share This Page