1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRT350N 1.04.3 New firmware for the V1

Discussion in 'Linksys Official Firmware' started by sonarman, Apr 23, 2008.

  1. sonarman

    sonarman Network Guru Member

    Linksys released a new version of Firmware for the V1. Change Log Below

    1.04.3 Apr 11, 2008 1. Updated wireless multicast performance for improvement
    2. Update wireless driver
    3. Fixed issues with some DMA devices
    4. Fixed Apple MAC UPnP issue
    5. Fixed PPTP pass through
    6. Modified Radio band default to 20MHz
    7. Modified to support LELA 3.0
    8. Fixed xbox issues
  2. mito

    mito LI Guru Member

    hi, pls post the firmware link.
  3. sonarman

    sonarman Network Guru Member

    Funny thing, Linksys pulled it from the firmware page. Not sure why. We have asked a questions
  4. Toink

    Toink Network Guru Member

    Apparently there were reports it bricked some routers (reminiscent of the 1.03.6 firmware they also pulled out some 24 hours after it was posted).

    Anyways, for those who are willing to give it a go here's a link: WRT350N_1.04.3_US_fw.bin

    I was able to flash my friend's WRT350n using the tftp.exe. Reset your router to factory defaults BEFORE flashing. Then wait some 3-4 minutes AFTER flashing with the tftp.exe utility. Then check if the LED are already 'on-steady' before doing a hard reset.

    CAUTION: This is not for the faint-hearted. Flash at your own risk.
  5. jgdiaz

    jgdiaz LI Guru Member

    I tried this firmware on my WRT350N that I was not using anymore, it flashed ok but when I made any changes and hit save it would lock up and none of the settings were saved, so I just ended up flashing the router with the DD-WRT.v24_WRT350n_mini firmware and I am using it just as an access point to expand my wireless network and so far it is working just fine with the DD-WRT firmware.
  6. mito

    mito LI Guru Member

    Hi, i was looking forward for a different firmware because of the wrt350n instability, loaded firwm 1.03.7 and all the same, finally got sveasoft and everything goes fine since then plus some new features, no usb storage but next month releases a new firm with mass storage, usb camera and more.

Share This Page