1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRT350n V2 whit bittorrent client build in.

Discussion in 'Cisco/Linksys Wireless Routers' started by sconk, Dec 13, 2007.

  1. sconk

    sconk Network Guru Member

    Download the firmware from here.


    This firmware first stats a telnetd on port 33 WHIT NO LOGIN!

    Then it try to mount /dev/sda1 if it works it shares the drive.

    Then it try to run a file named fun_plug in the root of the drive.

    What can i use this to you might ask, well your router is now a close to be a bittorrent client. Just download this file
    extracts to your SDA1 share and reboot the router. And you will be abel to connect to it.

    For more help on the mldonkey see this blog.

    need help ask here, please dont send private Message to me.
  2. sconk

    sconk Network Guru Member

    you need to open mlnet.sh and remove line 13-17

    if [ -d "$MLDONKEY_DIR" ]; then

    mkdir $MLDONKEY_DIR

    Then it will work.
  3. ditansu

    ditansu Addicted to LI Member

    broken link ?

    Hi sconk, thank you for your great job, may be I mistake but this link http://upit.jtw.dk/dl/ctk/ is not correct. If you goes by this link you could see this message:
  4. sconk

    sconk Network Guru Member

    i dont build the bittorrent client firmware any more so i cant help :(
  5. ditansu

    ditansu Addicted to LI Member

    Yes, I see
    But I not see how you start mldonkey, look at that:

    The /usr/sbin/chk_fun_plug (is there your script?) we could find this line

    ~ # grep -in "ln -s" /usr/sbin/chk_fun_plug
    19: ln -s /share/SDA$COUNTER /mnt/HD_a2

    But if you try do it into a console then you get error like this:
    ~ # ls -l /share/
    drwxrwxrwx 4 2000 2064 32768 Jan 1 1970 BOOK1
    drwxrwxrwx 4 2000 2064 32768 Jan 1 1970 SDA1
    ~ #
    ~ # ln -s /share/SDA1 /mnt/HD_a2
    ln: /mnt/HD_a2/SDA1: Read-only file system

    please gimme your comments.

Share This Page