1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRT54 Robert "Robson" Mytkowski Script Gen??

Discussion in 'Tomato Firmware' started by lettuce, Mar 31, 2008.

  1. lettuce

    lettuce Addicted to LI Member

    Hi all, im using a 20meg Virgin Media BB connection which is shared between a few devices:

    Main PC (Router)
    Xbox 360
    PC (Downstairs)
    Xbox (Downstairs)
    Wii (Wireless)
    PS3 (Wireless)

    My Linksys is a WRT54GL running the Tomato firmware, i have tried setting up Robert "Robson" Mytkowski WRT54 Script Generator to limited the bandwidth of the PC downstairs to start of with, but cannot seem to get it to work. I have set the PC downstairs to a static IP (192.168.1.22), I have setup WRT54 Gen to have a total DL of 12000kpbs and UL of 700kpbs and then added 1 user with the IP address of the PC downstairs (192.168.1.22) set the DL to 1200kpbs and UL to 200kpbs, left the priorty on normal and didnt touch TCP or UPD. Then copied the script to clip board and pasted it into the script section of the tomato firmware and saved, then rebooted the router. Went downstairs to see if it had limited the speed on the PC, used the website www.speedtest.net which still reports im getting a DL speed of 11000kpbs and UL of 710kpbs. Any idea why im still getting a full unlimited connection on the PC downstairs even though i have setup a script to limited the speed to 1200kpbs???
     
  2. lettuce

    lettuce Addicted to LI Member

    Anyone?
     

Share This Page