1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

wrt54g amd chip help

Discussion in 'Cisco/Linksys Wireless Routers' started by njemose1, May 5, 2006.

  1. njemose1

    njemose1 LI Guru Member

    I have a WRT54G with an AMD chip that read am29L my router appears to be bricked I have a solid red Diag light and I cannot get the Local Area Connection to show connected to it. I have followed the guide for shorting pin 15,16 and then shorting 16 to a ground with no luck i see these guides keep mentioning to ping -t 192.168.1.1 well how can i ping if theres no intermitent connection being made. any ideas? below are pictures of what the internals of the router looks like where is pin 15,16 ? if someone can highlight or something. because maybe i was shorting the wrong one.

    [​IMG]
    [​IMG]
     
  2. njemose1

    njemose1 LI Guru Member

    ok i got it to ping but now it shows port 1 led connections regardless of which port i move it to it will light up and i can ping it however will not allow me to upload the firmware and also now the red diag light is once again solid any ideas?
     
  3. njemose1

    njemose1 LI Guru Member

    ok and now no more ping back to solid light
     
  4. njemose1

    njemose1 LI Guru Member

    disregard this post managed to fix my wrt

    -------------___DD WRT___-------------
     

Share This Page