1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRT54G and cantenna: which connector?

Discussion in 'Cisco/Linksys Wireless Routers' started by gianni76, Mar 19, 2005.

  1. gianni76

    gianni76 Network Guru Member

    Guys,
    I would like to buy a connector to build a cantenna to use with a WRT54G.
    (the connector that is placed on the can). Tutorials on the Internet talk about a type N connector. Is it correct also for the WRT54G?

    Could you tell me exactly which connector should I buy among these?
    http://www.solwise.co.uk/wireless_connectorssundries.htm

    If this is not in this list, could you suggest somewhereelse on the same site (I am going to order something else there, so want to add also this connector).

    Thanks
     
  2. howardp6

    howardp6 Network Guru Member

  3. jdepew

    jdepew Administrator Staff Member Member

    Antenna Type

    The WRT54G uses a Reverse Polarity TNC connector. Most of the routers use this, while smaller items, bridges and network adapters use the SMA connector.
     

Share This Page