1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRT54g and Dlink DSL-300T - Pauses & delays

Discussion in 'Sveasoft Firmware' started by gtsib, Jul 21, 2004.

  1. gtsib

    gtsib Network Guru Member

    Hi all,
    I'm experiencing some weird delays with WRT54G connected to a Dlink DSL-300T Ethernet modem.

    The workstations (1 XP Pro, 1 Windows 200 Pro & 1 Mac OSX Powerbook) are connected to the router and can access the local network without problem, but when I try to access the Net from any workstation, there are always pauses for few seconds. When I ping a Net address (for example www.google.com) I get the following output:

    Reply from 66.102.11.99: bytes=32 time=45ms TTL=239
    Reply from 66.102.11.99: bytes=32 time=44ms TTL=239
    Request timed out.
    Request timed out.
    Request timed out.
    Request timed out.
    Reply from 66.102.11.99: bytes=32 time=44ms TTL=239
    Reply from 66.102.11.99: bytes=32 time=43ms TTL=239
    Reply from 66.102.11.99: bytes=32 time=44ms TTL=239
    Reply from 66.102.11.99: bytes=32 time=42ms TTL=239
    Reply from 66.102.11.99: bytes=32 time=43ms TTL=239
    Reply from 66.102.11.99: bytes=32 time=44ms TTL=239
    Request timed out.
    Request timed out.
    Request timed out.
    Reply from 66.102.11.99: bytes=32 time=44ms TTL=239
    Reply from 66.102.11.99: bytes=32 time=44ms TTL=239
    Reply from 66.102.11.99: bytes=32 time=45ms TTL=239
    Reply from 66.102.11.99: bytes=32 time=44ms TTL=239
    Reply from 66.102.11.99: bytes=32 time=43ms TTL=239
    Reply from 66.102.11.99: bytes=32 time=44ms TTL=239
    Reply from 66.102.11.99: bytes=32 time=44ms TTL=239
    Reply from 66.102.11.99: bytes=32 time=44ms TTL=239
    Request timed out.
    Request timed out.
    ...
    and goes on like that continuously. When I remove the WRT54G from the chain and I connect a workstation directly to the modem, I have no pauses at all.
    All the workstations use wired connections with static IPs in the range 192.168.0.12 - 192.168.0.40, Subnet mask 255.255.0.0, Gateway 192.168.0.1, and DNS 192.168.0.1.

    The setup is:
    ISP: BT UK

    WRT54G
    ----------
    Firmware: Sveasoft Satori-4.0 v2.07.1.7sv
    Auto configuration
    IP Address: 192.168.0.1
    Subnet: 255.255.255.0
    Gateway: 192.168.0.1
    DHCP: Off
    Wireless: Disabled
    Firewall: Disabled

    Dlink DLT-300T
    ------------------
    DHCP: Enabled
    DHCP Lease: 9999
    Connection Type: PPPoa
    Firewall: Disabled


    Have anyone experienced something similar, or has any ideas how to solve this problem.

    Thanks,
    George Tsib
     
  2. Toxic

    Toxic Administrator Staff Member

    try turning on or off "loopback" in management of router
     

Share This Page