1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRT54G and Microsoft VPN

Discussion in 'Cisco/Linksys Wireless Routers' started by biggz, Jun 5, 2005.

  1. biggz

    biggz Guest

    I have been trying to get my PC to connect to my workplace via VPN. I am using Microsoft VPN to connect.

    Here is the router information:
    WRT54G ver 2.
    Firmware Version: Alchemy-6.0-RC5a v3.01.3.8sv

    My old DLINK router was able to connect and everything worked great, this router connects, but I can not browse the network.

    Any ideas. I searched the forums but I didn't find a good answer. Port forwarding was mentioned. Can someone give me a good example?

    I know that my computer makes a connection to the VPN address on port 1723. It also looks like my computer opens port 139 for listening, but nothing connects.

    Thanks in advance
     
  2. bluedog

    bluedog Network Guru Member

    Do you have any other firewalls? Also, is your router ip in the same range as your assigned vpn IP? If so, that will cause problems... For instance if you are a 192.168.1.x number and the work assigns you 192.168.1.13... Try changing your router to use 10.xx.xx.xx numbers.

    Just a couple of ideas...

    BD
     

Share This Page