1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRT54G and speed Booster

Discussion in 'Cisco/Linksys Wireless Routers' started by BJPunisher, Nov 23, 2005.

  1. BJPunisher

    BJPunisher Network Guru Member

    Is it possible to flash my WRT54G V2 with a 54GS firmware to get the speedbooster capabilities ?

    Someone tested it ?
  2. danielhaden

    danielhaden Network Guru Member

    dd-wrt v23 mini generic can enable afterburner/speedbooster (menu option in advanced wireless says afterburner)

    If this works nicely, you may flash Thibor's HyperWRT (ease of use and great power) or the Standard version of DD-WRT (loads of different features).

    If this doesn't work, you may return to Linksys firmware or use Tofu's HyperWRT.

    Be sure to clean out the NVRAM after this adventure.

    Edit: Cleaning the NVRAM while running DD-WRT will brick the router. Do the cleaning while running HyperWRT.
  3. BJPunisher

    BJPunisher Network Guru Member

    thanks a lot
  4. SteelersFANinMA

    SteelersFANinMA Network Guru Member

    BJPunisher, please let us know if you got that working on your v2.
  5. dasfast

    dasfast Network Guru Member

    I think that mod only applies to v4 of wrt54g because they have the same mainboard as the v4 wrt54gs. I know the method works, as I now have a fully functioning wrt54gs...... :cheering:

    see here Adding thibor's firmware to v4 WRT54g
  6. 4Access

    4Access Network Guru Member

    When using which DD-WRT firmware version on what hardware?!? I don't have this problem and haven't seen this problem reported...
  7. 4Access

    4Access Network Guru Member

    Actually it's supposed to work on any WRT54G hardware according to BrainSlayer.

Share This Page