1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

wrt54g briged to 2wire dsl

Discussion in 'Networking Issues' started by superdaveozzborn, Jul 14, 2011.

  1. superdaveozzborn

    superdaveozzborn Networkin' Nut Member

    i have been searching for an answer all day on how to extend the range of my 2wire using a WRT54G router without running a cable between the two. i have found tutorials that were close but not what i am trying to do.

    would like to know how to use the WRT54G to extend the limitations of the 2wire

    phone line -> 2wire -> wifi -> WRT54G -> both wifi and cat6

    at the far end of the house i get little to no signal from the 2wire so i would like to setup the WRT54G in a way to fix that.

    in same end of the house as the 2wire i will just connect to it, at the other end i will connect to the WRT54G with no wires between the 2wire and the WRT54G.

    any links to a tutorial on how to do this would be much appreciated.

    thank you!
     
  2. Toxic

    Toxic Administrator Staff Member

    you need to setup WDS, however WDS needs to be supported by both routers
     

Share This Page