1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRT54G Firm WARE HELP PLZ!!!!!!!!!!!!!!!!

Discussion in 'HyperWAP Firmware' started by Fayz, Dec 31, 2005.

  1. Fayz

    Fayz Network Guru Member

    :sadbye:
     
  2. crawdaddy

    crawdaddy Network Guru Member

    what an obscenley detailed post....perhaps you could get some help if you told us what version router u have, what version firmware, what you did, what's wrong, etc, etc...
     
  3. Fayz

    Fayz Network Guru Member

    sry i hav ver 4

    my current firmware is 1.1
     
  4. Fayz

    Fayz Network Guru Member

    i havent done any thing

    i need help on how to update firmware
     
  5. Toxic

    Toxic Administrator Staff Member

    how on earth do you have a WRT54G v4 with v1.1 firmware?

    impossible.

    are you sure you dont have a v1.1 WRT54G and v4.xx firmware?
     
  6. Fayz

    Fayz Network Guru Member

    i went to the routers settings and it said firm ware ver. 1.4
     
  7. Toxic

    Toxic Administrator Staff Member

    well i dont know as you now say v1.4 when you already said v1.1

    which is it?

    goto the routwr setup. main page and look at top right hand corner, the firmware version should be listed there.

    write it down without making any mistake.

    also try: http://192.168.1.1/Status_Router.asp

    this will list the firmware revision. (as long as thats the IP of tyour router)

    also why do you open a thread in HyperWAP? this is for WAPXXX Access Point firmware and not the WRTxxx router?
     

Share This Page