1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRT54G Firmware 2.02.7

Discussion in 'Cisco/Linksys Wireless Routers' started by Toxic, Jul 25, 2004.


Firmware Functionality

  1. Works very well

  2. Works well but some issues

    0 vote(s)
  3. Works occassionally

    0 vote(s)
  4. Serious problems but some parts work

    0 vote(s)
  5. Firmware crashes device

    0 vote(s)
  1. Toxic

    Toxic Administrator Staff Member

    Firmware 2.02.7
    - Xbox Compatibility certified
    - Changed UPnP default to Enable to pass Xbox Compatibility Certification

    Firmware 2.02.2
    - Updated wireless driver to support all versions of WRT54G hardware
    - Adds support to allow WAP54G connect as a repeater
    - CTS protection mode set to disable by default to improve wireless performance in normal environments
    - Resolved issue where the WLAN LED stays on even when wireless is disabled
    - Resolved security vulnerability causing the web server in the router to crash

    Firmware 2.00.8 (WRT54G v.2 only)
    - Updated wireless driver

    Firmware Version 1.42.2
    - Updated wireless driver to 3.31.15
    - Added URL and contents filters
    - Added L2TP passthrough
    - Added HeartBeat Signal support
    - Resolved issue with Connect on Demand

    Firmware Version 1.41.2
    - Updated GUI format and layout

    Firmware Version 1.30.7
    - Adds UI control to enable/disable frame bursting
    - Resolves issue with firmware upgrade error in Internet Explorer 6.0.2800.1106.xpsp2.030422-1633, on Windows XP pro.
    - Send to disable DynDNS
    - Resolves issue with using the 4th tx key for WEP
    - Resolves issue with disconnecting PPPoE causing WPA to be disabled

    Firmware Version 1.30.1
    - Adjust PPTP max MTU value from 1400 to 1460
    - The router is now certifiable for the UPnP logo
    - Complies with final 802.11g standard
    - Improved performance asymmetry between the transmit and receive paths
    - Receive Broadcast packets from renew state. Some DHCP server (Dlink 300G+) send broadcast ACK after it receives a REQUEST
    - Fix: The firmware upgrade will fail, if DDNS updates while upgrading
    - Fix: If first DNS address fails, the second or third DNS address will be used to resolve domain names
    - Added the following items under Setup Page:
    - Router Name
    - Manual Time Server
    - MAC Clone
    - wireless domain
    - Security Settings
    - Added the following items under System Page
    - UPnP enable/disable
    - Ping Test and Traceroute
    - Added the following items under Wireless Page
    - CTS Protection Mode
    - Basic Rate
    - Added the following items under Status Page
    - Router Name
    - Start IP Address
    - End IP Address
    - Added Wi-Fi Protected Access(TM) support including AES and TKIP encryption
    - Resolves issue with Port Forwarding name showing up as garbage characters
    - Added "B-Only" option to wireless modes
    - Added "Default" option to Basic Rate settings

    Firmware Version 1.02.1
    - Incorporates updates found in the Draft IEEE 802.11g version 6.1 specification
    - Resolves interoperability issues with legacy 802.11b devices under Mixed Mode
    - Resolves a performance bug where the performance in a mixed b, g network did not go up once the last b client disassociated
    - Resolves issue where WEP degrades performance
    - Resolves issue with TZO DDNS Service
    - "Domain Name" replaces "name"
    - TFTP server will only verify image file name "xxxx.bin"
    - MAC Address Filter under the Advanced tab works on both wired and wireless clients
    - Fixed a bug that prevented wireless clients from connecting to the Internet if there was no active wired PC (PPoE customers in Europe and China only)
    - Support for UPnP enabled applications such as MSN Messenger
    - Fixed a bug that caused computers connected to the LAN ports to be dropped at some interval only to be immediately re-connected
    - Fixed Dynamic Routing issue between 2 Routers
    - Allows User to name Static Route Configurations
    - Modified PC List Web Page to avoid confusion
    - Stabilized Wireless-G to LAN and WAN Throughput
    - Stabilized Wireless-B to LAN and WAN Throughput
    - Improved LAN-WAN Throughput

    Firmware Ver.: 1.01
    - Initial release
  2. Engineer

    Engineer Network Guru Member

  3. DanL

    DanL Network Guru Member

    Firmware 2.02.7 Available

    I upgraded to the latest and firmware and too have lost signal strength and speed. Where can I download the previous firmware version? :?:
  4. DanL

    DanL Network Guru Member

    Never mind, found it on Linksys's FTP site. Put the 54G back to 2.02.7 and all is well again, 4 green bars... :D
  5. rich

    rich Network Guru Member

    2.027 works fine for me. 2.04 breaks my VoIP....packet8.

    Has anyone been able to get packet8 to work with 2.04?

Share This Page