I have A WRT54G hooked up with Wild Blue Internet. I had it hooked up to 3 computers directly and 2 computers through an old 10mbps Linksys hub. I am having problems with the WRT54G locking up. I have updated the firmware (v1.00.9). I thought it might be my WB modem stopping but I couldn't reach the WRT54G with 192.168.1.1. After a reset or unplugging it, it would come up and work fine. I removed the hub and plugged 1 of the 2 computers from that directly into the WRT54G (now using all 4 Ethernet ports). Hasn't locked up since, but that was only yesterday and it was locking up about once a day. Any ideas? Thanks, Brad
It is still locking up. If I hit the reset button, it starts working again. My comps network Conn shows connected at 100Mbps but there is no responce to anything. It is locking up about 2-3 times a week. Should I return it or is this normal? Thanks, Brad