wrt54g networking performance ethernet

Discussion in 'Cisco/Linksys Wireless Routers' started by moses_mwc00, Mar 12, 2005.

  1. moses_mwc00

    moses_mwc00 Network Guru Member

    Hello,
    I'm having poor networking performance using my wrt54G to connect two ethernet devices to the ethernet ports. The download/copy speeds barely exceeds 4MB/s and the wireless ones never exceeds 2MB/s on a purely lan configuration that is between two ethernet devices.
    Is there any setup I need to perform in my router to enable high speed transfer ?
    I set up my PC ethernet card to auto speed and not force 100bt
    the firmware of the router is :v2.02.7, Feb. 27, 2004

    Thanks
     
  2. howardp6

    howardp6 Network Guru Member

    Check your TCIP receive windows size (e.g. RWIN). It should be set at least 32K. You can gor to WWW.DSLREPORTS.COM and go to tests and run a TWEAK test. The most you are going to get in a wireless to wireless is a 22Mb on a normal router, or 41Mb on a MIMO router. You czn use IPERF to do your testing. Do not believe the advertised rates, they are just hype.
     
  3. moses_mwc00

    moses_mwc00 Network Guru Member

    Thanks for the reply.
    I'll try that tonight.
    Moses
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice