1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRT54G - Port Forwarding to a range of ip's

Discussion in 'Cisco/Linksys Wireless Routers' started by MB_VGT, Feb 11, 2005.

  1. MB_VGT

    MB_VGT Network Guru Member

    Is it possible to open or forward a udp port to a range of ip's?

    Specifically I want to open udp port 4900 so that all my computers on the network can recieve some dynamic data. It works if I forward to a static Ip but.....I use DHCP and need to forward to more than 10 computers. I've tried Port Triggering but that didn't work either.

    Any help would be greatly appreciated.

    Matt B

    WRT54G v2.2 Firmware v3.03.1
  2. Dowunda

    Dowunda Network Guru Member

    I have forwarded the same port six times and gave access to six different IPs in the range I assigned....

  3. MB_VGT

    MB_VGT Network Guru Member

    huh? I not sure I understand what you did. The router allows you 10 places to input ports that are forwarded. I need to just open the udp port to all my computers (More than 10). You said that you assigned a range...how did you do it? I tried port forwarding to the gateway and that didn't work either. Thanks for replying!


Share This Page