1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRT54G/Satori-4.0 v2.07.1.7sv /PDA Palm Tungsten C/WEP Encr.

Discussion in 'Sveasoft Firmware' started by hardyx9, Sep 26, 2004.

  1. hardyx9

    hardyx9 Network Guru Member

    Dear experts,

    Once in a while I am reading here in the forum when I need some advice, but I did not see/find a similar topic:

    I can connect my new PALM Tungsten C -which has WLAN feature- wireless to my private little network /WRT54G only, when i disable the WEP encryption. For the past 9 months i had it enabled, and the same on my Laptop, and it was running perfectly. Only now, the Tungsten does not like to connect. So my network remains 'open', although I activated the MAC Filter, and disabled SSID broadcast. I have to admit, that I am not too expert with the advanced stuff, like VPN or other things, so I may have left out some solution.

    Yes, i know that 64 bit (as shown in the router) is the same as 40 bit Hex. as shown in the Tungsten (resp- 128 / 104).

    Is there a known problem in connectivity between a Tungsten C and the WRT54G, or with a.m. Satori Firmware?
    Anyone else has similar problem? Any idea what I can try next is welcome! I am thinking that maybe I should try a different firmware.

    Hardyx9
    Germany
     
  2. Toxic

    Toxic Administrator Staff Member

    and you have tried a different password? rebooting WRT54G?
     

Share This Page