1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRT54G + Thibor 14 + Netdisk

Discussion in 'HyperWRT Firmware' started by sunnyoc, Apr 27, 2006.

  1. sunnyoc

    sunnyoc Network Guru Member

    Hi,

    I have WRT54G V4 with Hyperwrt 2.1b1 + Thibor14 version firmware. I have a XiMeta Netdisk 250 GB External Hard drive which is attached to the router through the ethernet port (http://www.ximeta.com/products/network_drives/netdisk/index.php). The problem I am having is, the Netdisk is constantly getting disconnected and reconnected again and again. I had a regular linksys wireless B router before and never had problem with that router. I am not sure how I can resolve this issue. Please if any one has the solution, I would love to know more about this.

    Thanks
     
  2. RTSAnime

    RTSAnime Network Guru Member

    Try giving the disk a static ip
     
  3. grcore

    grcore Network Guru Member

    Does this happen with the stock Linksys firmware?

    Have you tried contacting the manufacturer? There are known issues with NDAS and certain routers/wireless APs.
     
  4. sunnyoc

    sunnyoc Network Guru Member

    I will try giving a static ip address.


    I havent tried this with the stock firmware of linksys. I had netgear router before and didnt have a problem. I had a linksys b router and it also didnt have a problem.
     
  5. jgutz20

    jgutz20 Network Guru Member

    i would think giving it a static IP would be the most reliable way regardless of which router and firmware
     
  6. sunnyoc

    sunnyoc Network Guru Member

    guys,

    how can i assign static ip address to my netdisk? please tell me the steps or refer me to any website or forum discussion in here.

    thanks
     
  7. BCan

    BCan Network Guru Member

    Thibor 14 allows for static IP's.

    From the main config page, labelled setup, there will be an option labelled Static DHCP, where you can list the MAC address of the Netdisk (It should be lablled on the disk itself) and assign it an address outside of your DHCP range.
     

Share This Page