1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Wrt54g using WPA in client mode

Discussion in 'Sveasoft Firmware' started by testykul, Sep 9, 2005.

  1. testykul

    testykul Network Guru Member

    On sveasofts site it says it support client mode with WPA.

    I've seen lots of people say it doesnt work, is this true? I've also seen the odd person that says it should work.

    If not can you point me in a direction of a bridge(or wireless usb/pci) that supports WPA-TSIK
     
  2. Disman_ca

    Disman_ca Super Moderator Staff Member Member

    I'm not sure of the specifics but I do know it kind of works (crappy answer I know). Hence the reason some say yes or no. It is not as easy as the GUI would suggest. I'll see if I can dig up some additional info but I suggest you investigate the wl in a terminal session (telnet/ssh) as it has tonnes of options/switches and is the wireless driver. just run wl -h and you see what I mean (in a terminal of course !)
     
  3. testykul

    testykul Network Guru Member

    K. I need to know it works for sure as I'm trying to logon to my schools wireless that uses WPA. I can't adjust their AP so I need to know it will work.

    But by the sounds of it I'm better off sticking with a usb adapter I just picked up.
     
  4. Disman_ca

    Disman_ca Super Moderator Staff Member Member

    I wish I could offer a better answer, but you desicion to stick with the USB unit is probably best for now.
     

Share This Page