1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRT54G v 1 in Mixed Wireless Mode Problem

Discussion in 'Cisco/Linksys Wireless Routers' started by Anonymous, Dec 6, 2005.

  1. Anonymous

    Anonymous Guest

    Basicly the problem is I can't connect my old WET11 v1 to WRT54G v1 with HyperWRT 2.1b1 firmware in it if WRT is in either Mixed or B Only mode.

    The CTS Protection Mode: Auto
    Wireless security is Disabled

    Is it a known problem for this router and if yes is there anything could be done to fix it?

  2. Esquire

    Esquire Mesquire Staff Member Member

    Some WRT54G exhibit problems in Mixed Mode, but it should work in B only mode and WEP encryption for older devices.

Share This Page