1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRT54G v1.0 - AMD Flash Part Question.

Discussion in 'Cisco/Linksys Wireless Routers' started by mmstevenson, Nov 4, 2006.

  1. mmstevenson

    mmstevenson Guest

    Okay, my v1.0 just bricked (for no aparent reason, I'm not someone who messes with the firmware, ever!) .. so anyway, I found the guide to debrick versions with the intel flash part, but I don't know the part number of those because mine has an AMD flash part.

    So, anyway, long story short, does anybody know either the pinout of the flash part that the guide talks about (the Intel one) so that I can just see what the point of shorting the various pins together is and do the same for my flash part (for the corresponding pins)? I suspect that they were just resetting the flash part, which on my AMD part is pin 12, but I just want to confirm it before I ground the bugger ..

    Thanks ahead of time for any information ..
     

Share This Page