1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRT54G V2.2 WHAT FIRMWARE FOR BRIDGE SUPPORT ? H E L P !!!

Discussion in 'Networking Issues' started by sleis, Mar 7, 2005.

  1. sleis

    sleis Network Guru Member

    Hi all.

    I have three WRT54G V2.2 and need the following:

    location 1: Lan and wlan pc's, dsl connection.
    location 2: Lan pc's (wlan would be an extra no must)
    location 3: Wlan pc's

    loc 1 and 2 connected via wlan only
    loc 2 and 3 connected via lan only

    I very much try now with firmware you can imagine because I not find legal software for my project. I use loc1+3 ap mode and loc2 client mode, all wpa protected. My problem is that between loc 1 and 2 there is only 24mbit conn. very unstable.

    And this firmware I try is for expert only and because I not subscribed It is not allowed for me. Dont missunderstand me. I not want use this firmware, but what is good for my projekt and work stable ? AND HOW ALL SETTINGS ?

    Please help me legalise and understand (with simple firmware and instructions)

    Thank you.
     

Share This Page