wrt54g v4 upgrade firmware failed, please help

Discussion in 'Cisco/Linksys Wireless Routers' started by xiaojian, Nov 11, 2005.

  1. xiaojian

    xiaojian Network Guru Member

    I just bought a wrt54g v4 router and trying to upgrade the DDWRT

    v23b beta2 from the linksys configuration page, but it returned me

    as upgrades are failed! :( I don't know what to do now, any help

    is highly appreciated!
     
  2. nonew

    nonew Network Guru Member

    Hi, I got the same problem. Did you upgrade the Linksys firmware before you tried the DD-WRT? If not, do you know what version of the Linksys firmware was originally loaded in your WRT?
     
  3. nonew

    nonew Network Guru Member

    I found this:

    Special notes for flashing the WRT54Gv4

    Only DD-WRT version 23 or higher support the WRT54Gv4 and it does not support flashing the std or voip version of DD-WRT from the original Linksys firmware, because they limited the maximum firmware size to 3 MByte (as noted below). Thus, only the mini version of DD-WRT can be flashed initially. Once DD-WRT mini is installed, you can upgrade to std or voip versions. Use the *_generic.bin and the web interface when upgrading, unless the web interface is unavailable. Use tftp if the web interface is not available. The special (mini/std/voip)_wrt54g.bin file is only needed if you need to use tftp to upgrade the firmware. Remember to reset to factory defaults before and after every flashing.
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice