1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRT54G v5 dont debrick

Discussion in 'Cisco/Linksys Wireless Routers' started by rafaelhneves, Jan 23, 2008.

  1. rafaelhneves

    rafaelhneves LI Guru Member

    Hello, i have a bricked WRT54G v5, but i made a jtag cable and i trying to debrick my router.
    I erase the CFE, KERNEL, NVRAM, and i found a CFE file in downloads of DD-WRT website.
    I flash my router with this CFE file, the router enable response in ping, but the power led continues to blink.
    After flash, i uses the TFTP tool, to upload a dd-wrt firmware to router, but nothing happens...
    Anyone can tell, what is wrong?
  2. rafaelhneves

    rafaelhneves LI Guru Member

    Solved Problem...
    Just a bit of patience, and resolved :D
  3. Yasmin

    Yasmin Guest

    bricked WRT54G v5

    would you be a sweetie and tell why it wouldn't debrick 1st time and how you fixed it?

Share This Page