1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRT54G V5 ( Mircro ) Issues

Discussion in 'DD-WRT Firmware' started by sirsquishy, Apr 25, 2007.

  1. sirsquishy

    sirsquishy LI Guru Member

    For the Most part this router running the Micro Firmware is ok, But when the router has been up 10+ hour and you make any "system" level change it will cause the router to Lockup and reboot.

    For example, I just added a Static DHCP client to the router, and the Config page locked up. The router is no Longer responding to Pings, and I cannot VPN/SSH into my home network.

    I am running DD-WRT Ver23 SP2.

    Any Ideas on this, its getting Annoying.

    The performance around this time was

    3% for Thresholds
    77% for Memory
    94% for Memory Used ( out of the Memory Taken- not sure how the 2 values work together, Looks like DD loads into memory, then the Memory that DD takes is used to run DD, while leaving X memory available to the Router/system )

    I do not have alot of services enabled, due to the fact im still playing with the V5 settings and such.
  2. Slimey

    Slimey Network Guru Member

    You give the 23 SP3 micro betas a try to see if it helps?

Share This Page