1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRT54G V6 problem, need help!

Discussion in 'Cisco/Linksys Wireless Routers' started by williamyu, Apr 29, 2007.

  1. williamyu

    williamyu Guest


    I have upgraded firmware to the latest 1.02.0. but the router is just keeping drop connection every 9 hours or so. Well I can't not say it "drop" connection, since the PCs were able to access internet. BUT accessing router Web UI ( took ages. I went to the Status page, and the Login status show connected but with the Connect button beside it (it SHOULD show Disconnect), The IP address shows correctly, BUT the subnet mask was changed to (it should, and Default Gateway, DNS1 and DNS 2 were all empty as well as MTU. This router is really SUCKS! Can anybody see to help a bit?


  2. Tommy_misiak

    Tommy_misiak LI Guru Member

    Hi William, I am not an expert on the subject but I suggest you to change firmware to a third pary one. For my personal experience I suggest DD-WTR, it works great and has more stability than Linksys one. However, please read on the subject first because there is a chance of bricking your device due to a bad flash. Check the forums here and you may also take a look at http://scorpiontek.org/portal/content/view/27/36/

Share This Page