1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRT54G v7.0

Discussion in 'DD-WRT Firmware' started by deepudips, Jan 3, 2008.

  1. deepudips

    deepudips LI Guru Member

    Hello All,

    I have a Linksys WRT54G v7.0 (S/n CDFE.....). My problem is...the signal is not strong enough ...the device is on the GRound Floor and the signal is hardly there in the First Floor, no guesses...2nd Floor it wont detect at all :(((((((((

    plz plz plz plz plz plz plz someone help me in finding a suitable Firmware apart from Linksys (v7.0.0.4 running) which could help me in boosting the signals......

    Thanks Guys,
  2. deepudips

    deepudips LI Guru Member

    Pls some one help me...
  3. Mastec

    Mastec Network Guru Member

    There is no third party firmware for the WRT54G v7.0

    If it were a WRT54GS v7.0 you could load DD-WRT onto it. If you want to run 3rd party firmware look into getting a WRT54GL
  4. deepudips

    deepudips LI Guru Member

    I have the WRT54G v7.0, s/n starts with CDFE.... is there a way apart from buying the Antennas or chaning the device to improve the Signal Quality..

  5. Toxic

    Toxic Administrator Staff Member

    yes you can add reflectors or make your own though it has limited performance.


    you could also make your own cantenna out of a pringles tube.
  6. Toxic

    Toxic Administrator Staff Member

    btw i have noticed a WRT54Gv7_V7.00.7#000 Beta.zip available do you wish to try this? there is no change log so I cannot tell what fixes are included.
  7. deepudips

    deepudips LI Guru Member

  8. BongoTrumman

    BongoTrumman Guest


    I have a WRT54G v7 myself. I'm wondering if you could PM me a link to that v7 beta firmware. I bought my router to use dd-wrt so it's worth a shot.

Share This Page