1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

wrt54g with hyperwrt_thibor

Discussion in 'DD-WRT Firmware' started by 2001rotax800, Apr 25, 2011.

  1. 2001rotax800

    2001rotax800 LI Guru Member

    Hello everyone, I have been up and running with 2 WRT54G's set up as access points for quite sometime now(2 years or so) but lately my main AP and been giving me connection issues with my cable modem it is wired to, I seem to have to unplug the router for 10-15 seconds once or twice a day in order to get connectivity. I am wondering if I need to update my firmware. I am currently running Hyperwrt_thibor_a10a1fc5.cfg Thanks
  2. Kent_Diego

    Kent_Diego LI Guru Member

    I used Hyperwrt_thibor for many years and it was 100% stable for me. Since it worked for you for a long time and now is starting to crash I would suspect a hardware problem. Maybe you will have better results with DD-WRT or Tomato. Try a different power brick or open router and blow out dust and look for bulging capacitors.

Share This Page