WRT54g + ( WRT54g AS WAP54g )

Discussion in 'Other Linksys Equipment' started by dirkle, Mar 16, 2006.

  1. dirkle

    dirkle Network Guru Member

    Hi guys,

    I want to build up a wireless home network with a wireless rouer and access-point. I found out that 2x WRT54g is cheaper then 1x WRT54g and 1x WAP54g so i just ordered 2 of those routers :shock:

    my question: Is it possible to flash into one router, that will work as AP the firmware from WAP54g, in order to only got those important settings? I know very well, it's a critical action, just curious if it would work, or not :)

    Thanks a lot

    greetz
    dirkle
     
  2. howardp6

    howardp6 Network Guru Member

    As long it us not a version 5.0, since there is no third party firmware for that model. Always do firmware updates from a wired connection and after reseting the router to factory defaults.
     
  3. dirkle

    dirkle Network Guru Member

    thanks @ howardp6

    yea i've taken good care and ordered 2 pieces of v4.0 :D

    but i'm not trying to upload a 3rd firmware into the ' becoming AP' it's a firmware from an other model. It's too risky to just try, that's why i want some opinions..

    What if i've done so and it doesn't boot up.. is there ways to rescure the deadflashed device?

    I'm not so experienced in those things... :) thanks

    ----------------------------------------------16.03.2006@21:31GMT+1------
    noone got more hints? Can i flash WRT54g v4.0 with firmware of WAP54g without making the device down?

    greetz
    dirkle
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice