1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRT54G3G - no automatic reconnect?

Discussion in 'Cisco/Linksys Wireless Routers' started by Tiber, Apr 20, 2006.

  1. Tiber

    Tiber Guest

    Hi!

    I'm using WRT54G3G routers with Vodafone Mobile Connect UMTS cards.

    The router allows to configure an "auto connect" to bring it online on power-up. The problem is, that if the connection gets lost, the router does not automatically reconnect.

    I only have "passive" hosts attached to the router, so I can't use the port triggering to make it come online again, after the connection dropped.

    Now I've downloaded the firmware from Linksys and could also successfully compile it. Any ideas, what I could modify in the firmware to have an "auto-reconnect" feature?

    AFAIK OpenWRT still doesn't support the UMTS card slot, so I've to stick with Linksys's original firmare?

    Any ideas?

    Thx,

    Tobias
     
  2. AnfieldReds

    AnfieldReds LI Guru Member

    Hi Tobias,

    Which version of the firmware are you using?
     
  3. geertvm

    geertvm LI Guru Member

    Hello I have the same problem I have a wrt54G3G for remote alarming
    after 2 or 3 hours we can't connect it anymore.If we push the connecting buton it works again. But it's no go for remote locations
    Can we do a firmware upgrade or something else?
    I'am in big problems. Thanks for some help.
     
  4. geertvm

    geertvm LI Guru Member

    Hello Tiger
    I have found my solution. I clicked on always alive. And this works fine
    I hope you find also a solution
    good luck
     

Share This Page