1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRT54GC v1.02.08/09 Firmware Flaws

Discussion in 'Linksys Official Firmware' started by zdensys, Oct 21, 2005.

  1. zdensys

    zdensys Network Guru Member

    Hi,

    I was filling in the Port Forwarding Setting when I chanced upon this flaw.

    The values entered into the 'Start - End' port range will get corrupted if the value is greater than 32767 after you save the setting.

    Both v1.02.08 (Linksys Site) and v1.02.09 (Factory-loaded) both have this flaws in it.

    User will have to use the lower range of ports for their application till Linksys can release a newer firmware.

    Anyone experience this too with their WRT54GC? or is it just the unlucky me.. :sadbye:
     
  2. virgil

    virgil Network Guru Member

    Another F/W bug:

    Select Status -> WirelessNetwork

    under Channel, it lists the wrong frequency (by 5MHz) e.g.

    Channel 1 - 2.417GHz

    when it should be 2.412 GHz.

    Of course it's cosmetic only, as the box operates in the correct frequencies.

    Problem exists is Firmware Version: v1.03.0 (EU) and v1.02.8 (US)
     
  3. zdensys

    zdensys Network Guru Member

    Virgil,

    Does you box also contains this bug like mine?
     
  4. virgil

    virgil Network Guru Member

    As you can see, none of our concerns posted here so far were addressed, although I did have problems with Keep_Alive so I am using 1.04.5 on a unit that originally came with 1.02.8

     

Share This Page