1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

wrt54gl multiple VLANs/LANs

Discussion in 'Networking Issues' started by adam_l, May 19, 2008.

  1. adam_l

    adam_l Guest

    Hello everyone,

    I've got two issues:

    1. I'd like to have two vlans with WRT54GL. In the router's configuration panel there is room for only one IP address of a subnet. Is it possible to have morelan than one vlan subnets?

    2. Is it possible to have a different vlan subnet and lan subnet using the switch?
  2. HennieM

    HennieM Network Guru Member

    If you use firmware (such as Tomato, dd-wrt, Thibor, etc.) which allows you to telnet or ssh into the router, take a look at the "vconfig" executable.

    Once you figured it out, you can add the necessary commands into a script to run everytime the router starts.

Share This Page