1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRT54GL PPPt high CPU usage

Discussion in 'Tomato Firmware' started by ceckin, Oct 17, 2012.

  1. ceckin

    ceckin LI Guru Member

    Guys i'm currently using one of Teaman's VPN builds and i want to keep the pptp server online (so no matter where i am i can use it as VPN for my phone), however when i enable the server, it doesn't matter if there are connected pptp users or not - the bandwidth i get is ~10Mbps (on every device connected to the router (wired/wireless)) i.e the speed is limited to 10Mbps, the instant i disable the pptp server - the throughput goes back to normal.

    Is there a way to get PPTP server running (i need it only for my phone) on WRT54GL, without killing the bandwidth?
     
  2. kthaddock

    kthaddock Network Guru Member

    Try to turn off "Broadcast Relay Mode" in PPTP-server.
     
  3. ceckin

    ceckin LI Guru Member

    That was the culprit, thank you very much.

    Would've cool to bridge the pptp client and lan network, but guess a better router would be needed.
     
  4. kthaddock

    kthaddock Network Guru Member

    In that build I use PPTP-client is bridget to Br0, It's possibilty with bcrelay choose one of the other BR?
     

Share This Page