WRT54gl v1.1 with Tomato, can't access DNS-323

Discussion in 'Tomato Firmware' started by Ch0p5t1ckB01, Jan 7, 2009.

  1. Ch0p5t1ckB01

    Ch0p5t1ckB01 Addicted to LI Member

    Hi everyone!

    Tomato newb here!

    I've searched the threads here and I can't seem to find any answers to my problem, so I'm asking for help.

    I just flashed my WRT54GL v1.1 with Tomato 1.23. Everything is working fine, except my DNS-323. The 54GL can see the DNS-323, and has assigned it an IP of 192.168.1.149, but I cannot access the 323 at all. I've tried to type the IP to connect, nothing -_-", I've used the D-link search utility, nothing...

    Any help is greatly appreciated!!

    Thanks in advance!
     
  2. bripab007

    bripab007 Network Guru Member

    I'm using a DNS-323 with Tomato 1.23 as well with no problems.

    What exactly can you not access on the DNS-323? The web gui? The SMB file shares? The FTP server?
     
  3. Ch0p5t1ckB01

    Ch0p5t1ckB01 Addicted to LI Member

    Well everything -_-"

    I can't access the web gui or the ftp server or the smb file share
     
  4. bripab007

    bripab007 Network Guru Member

    I'm assuming you tried deleting the DHCP lease for the DNS-323 in Tomato and then power-cycling it?
     
  5. Ch0p5t1ckB01

    Ch0p5t1ckB01 Addicted to LI Member

    Well, I did everything (power cycle, hard reset).... EXCEPT, hard resetting the 323.

    I just gave it a try, and it works. Turned out (according to my friend) I had jumbo frames set on the 323, but since the 54GL doesn't support it, it didnt connect at all :tongue:

    bripab007, I appreciate you spending time trying to fix my problem XD
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice