1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRT54GL w/ 1.25 3.4 VPN DHCP Issue

Discussion in 'Tomato Firmware' started by pendetim, Jul 4, 2010.

  1. pendetim

    pendetim Addicted to LI Member

    I have a WRT54GL which is running 1.25 3.4 VPN software.

    The router works well, the VPN connects and most clients can connect and get a DHCP lease. There are 2 wireless G devices that can authenticate (running WEP) and show up in the connected device list on the router but the IP address lease is blank and no IP address shows up in either of the devices. This is only on the wireless side. A cat5 cable connection works.

    I have rebooted several times, backed up the configuration file and restored it with difference in behavior.

    Any Idea what the heck is going on here and how to fix it? MAC filtering is OFF and access restrictions are off also.

    I have not done a NVRAM reset however as I don't want to fubar it just in case the router goes south; I have no spare here. If I do reset the NVRAM can I simply reload the backed up configuration file and restore my configuration settings? What IP address does the device default to and what is the user/pass after a NVRAM reset?

    Thanks, Tim

Share This Page