1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRT54GL & WRT54G WDS mode does not work :(

Discussion in 'HyperWRT Firmware' started by schoeppchen, Oct 3, 2006.

  1. schoeppchen

    schoeppchen LI Guru Member

    Hi all,

    I've read the sticky thread on how to set up WDS on WRT54G(L/S) devices, but it won't work for me. Maybe someone of you has an idea on how to set up this. My topology is:

    DSL Modem <-wired-> WRT54GL(device A) <-wireless/WDS-> WRT54G(device B)

    Both routers run the following firmware: "Firmware Version: v4.71.1, Hyperwrt 2.1b1 + Thibor15c"

    I've made some screenshots on both routers how I set up WDS (which is not working), maybe someone could help.

    First the screenshots for router A (connected to the internet):

    http://i9.tinypic.com/2nv6wxd.jpg

    http://i9.tinypic.com/2zywyed.jpg

    http://i9.tinypic.com/2gt7vk3.jpg

    http://i10.tinypic.com/4h7sv3r.jpg

    http://i10.tinypic.com/2cz7o6r.jpg

    http://i10.tinypic.com/2wcmg4l.jpg

    http://i10.tinypic.com/2eey7pd.jpg

    And now the screenshots for router B (should connect via WDS to router A):

    http://i9.tinypic.com/343qfyo.jpg

    http://i9.tinypic.com/2djtatx.jpg

    http://i9.tinypic.com/4ic7eb8.jpg

    http://i10.tinypic.com/2i7lgur.jpg

    http://i9.tinypic.com/2i8ismx.jpg

    http://i9.tinypic.com/4cd0285.jpg

    http://i10.tinypic.com/43eju2r.jpg

    As you can see on either last screenshot, the devices list each other on the "Devices" tab, but now WDS connection seems to be established.

    Please help!
     
  2. schoeppchen

    schoeppchen LI Guru Member

    Hi all,

    just reconfigured WDS and now it works ;)

    My fault was that I did not use the wireless MAC, but the MAC of the internet port :((
     

Share This Page