1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRT54GS firmare upgrade problem

Discussion in 'Cisco/Linksys Wireless Routers' started by philga0, Apr 17, 2005.

  1. philga0

    philga0 Network Guru Member


    I had to restart my router. Unfortunately the power led does not stop blinking.
    I read in the manual that i had to reload the firmare (could have been corrupted). The problem is that I have no access to the GUI on my router. Is there any other mean to do that ?
    I read something about tftp that should come with the upgrade (but no tftp with the firmware downloaded from syslink site).

    Could you help ?
  2. jagboy

    jagboy Network Guru Member

  3. philga0

    philga0 Network Guru Member

    Thanks for the answer.
    I got the firmware from linksys, but it does not seem to be packaged as an upgrade (no transfert protocol included in the download).
    How can I get the tfpt tool to be able to transfer the firmware into the router ?

  4. Couledouce

    Couledouce Network Guru Member

  5. philga0

    philga0 Network Guru Member

    I succeeded

Share This Page