1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRT54GS Hardware differences

Discussion in 'Cisco/Linksys Wireless Routers' started by jaymcd, Nov 24, 2005.

  1. jaymcd

    jaymcd Network Guru Member

    Does anyone know the hardware differences between the V2, V3, V4 and V5 versions of the WRT54GS.

    I understand that there are some memeory differences, but what are they ?

    What other differences are there?

    Also, how can I tell if I have a point release version ( ie 2.2) ? Is it marked one the label the same way as the no point release or ?


  2. danielhaden

    danielhaden Network Guru Member

    Go to the front page of this site and click on the "autopsies" selection for the WRT54G/GS.
    There, at the bottom of the page is a detailed chart of the differences.

    There is only one that is bad and its serial number starts with CDFB.

    P.S. A point release is marked on the label as well as a different prefix on the serial number.

    P.P.S. If you have any more questions, I hang out at the forums of www.hyperwrt.org and answer a lot of questions there. Well, after posting a few stickies on the most common questions, there aren't so many questions asked anymore. But, those stickies may be a good read. I hope so. ;)
  3. jaymcd

    jaymcd Network Guru Member


    Thanks for the pointer Daniel!


Share This Page