1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRT54GS Install: Unable to download certificates

Discussion in 'TinyPEAP Firmware' started by scaron, Apr 1, 2005.

  1. scaron

    scaron Network Guru Member

    Problem description is at the bottom of this post :)

    Basic data:
    WRT54GS Version 1.0, Serial number CGN0xxxxxxxx
    Default tftp install, no errors on first try.
    Administration -> Reset to factory defaults for good measure.
    Firmware version: Satori-4.0 v2.07.1.7sv (tinyPEAP beta 2 download)
    Internet connectivity verified (DHCP default configuration)

    Variations from default configuration:
    Router name: PCEsansfil
    Local IP address: 10.4.5.1/24
    DHCP Server: disable
    Time Zone: GMT-05:00
    SSID: PCE
    Wireless channel: 11
    Security Mode: RADIUS
    RADIUS server address: 10.4.5.1
    Shared Key: thisPEAP
    Key1: deadaa2bad
    1st user: scaron
    Radius Password: thisPEAP
    New Certificate: PCEsansfil

    Router Password: (new password)
    SSHD: Enable
    SSHD Password login: enable
    SSH access verified with PuTTY, root and (new password)

    Broadcast SSID verified with Windows XP Home SP2 client (oronico_cs)

    Problem description:

    1) unable to add user in tinyPEAP management page
    in SSH session: "peapd adduser scaron password junk" fails with "Error in /tmp/peapd/peapd.conf on line 7
    got ÿ (=-1)
    current_key = mode
    current_value = embed
    error reading config file /tmp/peapd/peapd.conf

    2) in SSH session, force peapd to run yields the same error

    3) Create Cert Pair does not produce new certificate
    in SSH session cert_mgr can be seen running with syntax that does not match the program usage ie:
    cert_mgr cert /tmp/cert/.private/pkey.pem /tmp/cert/c....

    4) download certificate downloads nothing, not even the default key

    Wireless operations are OK with Security mode disabled. This configuration was tested twice to make sure that it could be reproduced.

    What other info do you need?

    Regards,

    Serge Caron
     
  2. tinyPEAP

    tinyPEAP Network Guru Member

    Hi Scaron,

    Few things that I want to know before start trouble shooting:

    1. the output of
    'cat /tmp/peapd/peapd.conf'
    'nvram get peap_config'
    'nvram get peap_users'
    from your ssh session.

    If any of them seem to dump the corrupt data,
    try 'nvram unset ***'

    2. the output of
    'ls -l /tmp/cert'
    'ls -l /tmp/cert/.private/'


    The syntax for adding users from console is
    'peapd add username password' and it only takes 4 parameters.

    For your third question, it is a documentation error
    and thanks for point that out. :-p

    -tak
     
  3. scaron

    scaron Network Guru Member

    Here is the info you requested (1 to 5 below). I have also added memory and disk usage and a complete dmesg output. I would think that some free space must be available even to create /var/run/*.pid files! However, there are 0 blocks available in the root filesystem.

    1) cat /tmp/peapd/peapd.conf

    (none):[~]# cat /tmp/peapd/peapd.conf
    "usersfile"="/tmp/peapd/peapusers"
    "shared_key"="password"
    "private_key"="/tmp/cert/.private/pkey.pem"
    "certificate"="/tmp/cert/cert.crt"
    "ca_private_key"="/tmp/cert/.private/cakey.pem"
    "ca_certificate"="/tmp/cert/cacert.crt"
    "mode"="embed"(none):[~]#


    2) nvram get peap_config

    (none):[~]# nvram get peap_config
    "usersfile"="/tmp/peapd/peapusers"
    "shared_key"="password"
    "private_key"="/tmp/cert/.private/pkey.pem"
    "certificate"="/tmp/cert/cert.crt"
    "ca_private_key"="/tmp/cert/.private/cakey.pem"
    "ca_certificate"="/tmp/cert/cacert.crt"
    "mode"="embed"
    (none):[~]#


    3) nvram get peap_users

    (none):[~]# nvram get peap_users
    (none):[~]#

    4) ls -l /tmp/cert

    (none):[~]# ls -l /tmp/cert
    (none):[~]#

    5) ls -l /tmp/cert/.private

    (none):[~]# ls -l /tmp/cert/.private
    (none):[~]#

    6) Memory & disk space

    (none):[~]# free
    total used free shared buffers
    Mem: 30644 10940 19704 0 1596
    Swap: 0 0 0
    Total: 30644 10940 19704
    (none):[~]#
    (none):[~]# df
    Filesystem 1k-blocks Used Available Use% Mounted on
    /dev/root 2496 2496 0 100% /
    (none):[~]#

    7) dmesg

    CPU revision is: 00029007
    Primary instruction cache 8kb, linesize 16 bytes (2 ways)
    Primary data cache 4kb, linesize 16 bytes (2 ways)
    Linux version 2.4.20 (root@d600) (gcc version 3.0 20010422 (prerelease) with bcm4710a0 modifications) #127 Thu Mar 31 01:33:22 EST 2005
    Determined physical RAM map:
    memory: 02000000 @ 00000000 (usable)
    On node 0 totalpages: 8192
    zone(0): 8192 pages.
    zone(1): 0 pages.
    zone(2): 0 pages.
    Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
    CPU: BCM4712 rev 1 at 200 MHz
    Calibrating delay loop... 199.47 BogoMIPS
    Memory: 30572k/32768k available (1435k kernel code, 2196k reserved, 112k data, 72k init, 0k highmem)
    Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
    Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
    Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
    Checking for 'wait' instruction... unavailable.
    POSIX conformance testing by UNIFIX
    PCI: Disabled
    PCI: Fixing up bus 0
    Linux NET4.0 for Linux 2.4
    Based upon Swansea University Computer Society NET3.039
    Initializing RT netlink socket
    Starting kswapd
    devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
    devfs: boot_options: 0x1
    pty: 256 Unix98 ptys configured
    Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
    ttyS00 at 0xb8000300 (irq = 3) is a 16550A
    ttyS01 at 0xb8000400 (irq = 0) is a 16550A
    HDLC line discipline: version $Revision: 1.1.1.4 $, maxframe=4096
    N_HDLC line discipline registered.
    PPP generic driver version 2.4.2
    PPP Deflate Compression module registered
    PPP BSD Compression module registered
    MPPE/MPPC encryption/compression module registered
    Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
    Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
    Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
    number of CFI chips: 1
    0: offset=0x0,size=0x20000,blocks=64
    Flash device: 0x800000 at 0x1c000000
    Physically mapped flash: squashfs filesystem found at block 941
    Creating 4 MTD partitions on "Physically mapped flash":
    0x00000000-0x00040000 : "pmon"
    0x00040000-0x007e0000 : "linux"
    0x000eb6f8-0x007e0000 : "rootfs"
    mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
    0x007e0000-0x00800000 : "nvram"
    sflash: found no supported devices
    NET4: Linux TCP/IP 1.0 for NET4.0
    IP Protocols: ICMP, UDP, TCP, IGMP
    IP: routing cache hash table of 512 buckets, 4Kbytes
    TCP: Hash tables configured (established 2048 bind 4096)
    ip_conntrack version 2.1 (256 buckets, 2048 max) - 368 bytes per conntrack
    ip_tables: (C) 2000-2002 Netfilter core team
    iptables-p2p 0.3.0 initialized
    ipt_time loading
    arp_tables: (C) 2002 David S. Miller
    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    NET4: Ethernet Bridge 008 for NET4.0
    Bridge firewalling registered
    802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
    All bugs added by David S. Miller <davem@redhat.com>
    VFS: Mounted root (squashfs filesystem) readonly.
    Mounted devfs on /dev
    Freeing unused kernel memory: 72k freed
    eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.50.21.10
    eth1: Broadcom BCM43XX 802.11 Wireless Controller 3.50.21.10 (Compiled in . at 20:53:00 on Jan 21 2004)
    flag=[get_flash] offset=[0] string=[<NULL>]
    Write mac init
    mac_init()
    location = [2]
    The mac[2] is available, address=[1e24]!
    cmd(90,ffffffff)
    flashutl_cmd->need_unlock=[1]
    flash_reset
    flashutl_cmd->clear_csr=[50] flashutl_cmd->read_array=[ff]
    scmd(50,0)
    scmd(ff,0)

    Set flash_type=Intel 28F640J3 4Mx16
    exit
    Algorithmics/MIPS FPU Emulator v1.5
    vlan0: add 01:00:5e:00:00:01 mcast address to master interface
    vlan0: dev_set_promiscuity(master, 1)
    device eth0 entered promiscuous mode
    device vlan0 entered promiscuous mode
    device eth1 entered promiscuous mode
    br0: port 2(eth1) entering listening state
    br0: port 1(vlan0) entering listening state
    br0: port 2(eth1) entering learning state
    br0: port 1(vlan0) entering learning state
    br0: port 2(eth1) entering forwarding state
    br0: topology change detected, propagating
    br0: port 1(vlan0) entering forwarding state
    br0: topology change detected, propagating
    ip_conntrack_pptp version 1.9 loaded
    ip_nat_pptp version 1.5 loaded
    vlan1: Setting MAC address to 00 0f 66 a5 a2 d4.
    vlan1: add 01:00:5e:00:00:01 mcast address to master interface
    SQUASHFS error: Can't find a SQUASHFS superblock on mtdblock(31,3)
    (none):[~]#
     
  4. tinyPEAP

    tinyPEAP Network Guru Member

    One more question before we get started.

    can you tell me the output of
    'nvram show > tail' ?

    It seems to me that all of your operations involving nvram write
    is failing... which I think is quite possible when it is filled all the way.
    (I personally can't imagine the situation where all 20KB
    nvram is flooded though...)

    Anyways, if that's the case, you can
    'nvram show' to find the attribute that is killing the space and use
    'nvram unset ***' to nuke it.

    -tak
    tinyPEAP Development Team
     
  5. scaron

    scaron Network Guru Member

    1) I may not have expressed myself previously:

    Your reply: The syntax for adding users from console is
    ''peapd add username password'' and it only takes 4 parameters.

    The correct command is "peapd adduser username password" and I receive the error "error reading config file ... on line 7". The values scaron and junk were used as username and password.

    2) nvram status is size: 14367 bytes (18401 left). I seem to be able to read and write nvram without problem and the variables in memory correspond to the configuration data emtered. The complete contents captured using SSH session logging is:

    =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2005.04.01 09:32:19 =~=~=~=~=~=~=~=~=~=~=~=

    (none):[~]# vi /tmp/junk
    (none):[~]# nvram show > /tmp/junk
    (none):[~]# nvram show
    wl_radius_port=1812
    wl_mac_deny=
    filter_dport_grp3=
    filter_dport_grp4=
    filter_dport_grp5=
    filter=on
    wan_unit=0
    wl0_net_mode=mixed
    filter_dport_grp6=
    os_ram_addr=80001000
    filter_dport_grp7=
    wl_br1_enable=0
    wl0_frameburst=off
    filter_dport_grp8=
    filter_dport_grp9=
    ddns_username_2=
    log_ipaddr=0
    boardrev=0x10
    il0macaddr=00:90:4c:5f:00:2a
    ppp_idletime=5
    ppp_passwd=
    httpsd_enable=1
    wl_wds3_enable=0
    ddns_enable=0
    et0macaddr=00:0F:66:A5:A2:D3
    skip_intel_check=0
    wl0_wep_buf=
    ddns_hostname_buf=
    d11g_mode=1
    wan_get_dns=172.16.1.254
    wl_wds9_enable=0
    boot_wait=on
    watchdog=5000
    syslogd_rem_ip=
    wl0_macmode1=disabled
    wl_phytypes=
    filter_web_host1=
    nas_enable=1
    tftpd_enable=1
    wl0_infra=1
    filter_web_host2=
    action_service_arg1=
    wl0_country_code=JP
    filter_web_host3=
    fw_disable=0
    et0mdcport=0
    router_name=PCEsansfil
    pppoe_keepalive=0
    filter_web_host4=
    artemis_HB_DB=
    filter_web_host5=
    sh_masq=br0 wds0.2
    wshaper_enable=0
    Intel_firmware_version=v1.41.8
    filter_web_host6=
    wl0_wds6_enable=0
    wl_infra=1
    filter_web_host7=
    apwatchdog_enable=0
    filter_web_host8=
    filter_web_host9=
    pptp_server_ip=
    ppp_get_ac=
    pmon_ver=CFE 2004.1.30.0
    restore_defaults=0
    dhcpd_statics=
    wshaper_downlink=0
    ppp_username=
    wan_lease=28800
    filter_port=
    sh_rules=
    ddns_enable_buf=
    d11g_dtim=1
    ddns_hostname=
    wl_radius_ipaddr=10.4.5.1
    http_wanport=8080
    filter_ip_grp1=
    filter_ip_grp2=
    lan_gateway=0.0.0.0
    wl0_ifname=eth1
    filter_ip_grp3=
    dr_lan_rx=0
    filter_ip_grp4=
    lan_domain=
    filter_ip_grp5=
    timer_interval=3600
    filter_ip_grp6=
    gpio2=adm_eecs
    telnetd_web=1
    pppoe_ac=
    filter_ip_grp7=
    filter_rule1=
    gpio3=adm_eesk
    wshaper_uplink=0
    hb_server_ip=
    ipsec_pass=1
    filter_ip_grp8=
    filter_rule2=
    loopback_enable=1
    filter_ip_grp9=
    filter_rule3=
    gpio5=adm_eedi
    vlan0ports=1 2 3 4 5*
    filter_rule4=
    gpio6=adm_rc
    expert_mode=0
    filter_rule5=
    filter_ip_grp10=
    filter_rule6=
    wl0_mode=ap
    filter_rule7=
    wan_gateway=172.16.1.254
    dhcp_start=100
    filter_rule8=
    filter_rule9=
    pptpd_enable=0
    os_flash_addr=bfc40000
    wshaper_nopriohostsrc=
    wl0_gmode=1
    dhcp_lease=0
    sromrev=2
    boardtype=0x0101
    wl_wds4_enable=0
    wl_active_add_mac=0
    dnsmasq_enable=1
    wl_gmode=1
    ping_ip=
    stats_server=
    static_route=
    wl_br1_nat=0
    d11g_rate=0
    wl0_wep_last=
    lan_netmask=255.255.255.0
    dmz_enable=0
    wl0_wds1_enable=0
    private_key=-----BEGIN RSA PRIVATE KEY-----
    MIICXAIBAAKBgQDSZaaI+b3HWaIZ8TAWgz0qIf8iY2G6hWd1o7mugFIKN+U8rxBd
    rpIn/s+Y8T6TBfRpE0ZmKAIyDKZA7m7E9HK4k09kfkQ3+Td/9Hsj3G2JTheoQAPs
    q65yrvtXcJP4vQgiJbuJVyPbvu5LMnUmtW+NFnTPZGLWplJOciqeW03gNwIBAwKB
    gQCMQ8RbUSkvkRa79iAPAijGwVTBl5Z8WO+jwnvJquFcJUN9ygrpHwwaqd+7S38M
    rqLwt4REGqwhXcQrSZ8t+Ex51rowZFUdlStVsniwVnWxXOTD3uSWY2knujfKfNxo
    DgzrGPPJn4QKNFTfB38VSDUzQDZZUCglERupbLrCbYsRiwJBAPhHvuSh2bC7NS4F
    nvps2MZLmakFcM9RsozFdgkgJ27cOxmYczYW8PDxcbXbKSiPtiwL/vOy+F5BrAzE
    UNXGTpkCQQDY8F0DIrHou0o6wHxgUCZ8dOjIp5pHPwSK4jGsKTU5GIZmtWexxtt/
    fYrxW12gkAoKF0p4c6auZyRCTinhNvdPAkEApYUp7cE7yyd4yVkUpvM7Lt0RG1j1
    34vMXdj5W2rE9JLSERBMzrn19fZLzpIbcF/OyAf/TSH66YEdXdg149mJuwJBAJCg
    PgIXIUXSMXyAUurgGahN8IXFEYTUrbHsIR1wziYQWZnORSEvPP+pB0uSPmsKsVwP
    hvr3xHREwtbexpYkpN8CQHR+LmROqptkqCkm9cofkVZ0AXx5hPwSRAeh5gL+B/P1
    8K/tn6Hmvsj8hPcjABEWDYCsqBC1h6rwbKAOxnyP3v0=
    -----END RSA PRIVATE KEY-----

    wl0_dtim=1
    wl0_ssid=PCE
    http_username=
    port_trigger=
    sh_routestopped=br0 -
    eth0 -
    eth2 -
    wds0.2 -
    certificate=-----BEGIN CERTIFICATE-----
    MIICjjCCAfegAwIBAgIBATANBgkqhkiG9w0BAQUFADB0MQswCQYDVQQGEwJVUzEL
    MAkGA1UECBMCR0ExEDAOBgNVBAcTB0F0bGFudGExETAPBgNVBAoTCHRpbnlQRUFQ
    MR4wHAYDVQQLExVDZXJ0aWZpY2F0ZSBBdXRob3JpdHkxEzARBgNVBAMTClBDRXNh
    bnNmaWwwHhcNMDUwMzMxMjAxOTQ5WhcNMTkwMjExMTM1MTMzWjB2MQswCQYDVQQG
    EwJVUzELMAkGA1UECBMCR0ExEDAOBgNVBAcTB0F0bGFudGExETAPBgNVBAoTCHRp
    bnlQRUFQMR4wHAYDVQQLExVDZXJ0aWZpY2F0ZSBBdXRob3JpdHkxFTATBgNVBAMT
    DHRpbnlwZWFwLmNvbTCBnTANBgkqhkiG9w0BAQEFAAOBiwAwgYcCgYEA0mWmiPm9
    x1miGfEwFoM9KiH/ImNhuoVndaO5roBSCjflPK8QXa6SJ/7PmPE+kwX0aRNGZigC
    MgymQO5uxPRyuJNPZH5EN/k3f/R7I9xtiU4XqEAD7Kuucq77V3CT+L0IIiW7iVcj
    277uSzJ1JrVvjRZ0z2Ri1qZSTnIqnltN4DcCAQOjMDAuMBMGA1UdJQQMMAoGCCsG
    AQUFBwMBMBcGA1UdEQQQMA6CDHRpbnlwZWFwLmNvbTANBgkqhkiG9w0BAQUFAAOB
    gQCg9SenacnhMb6iT22XbYVItE4hd/qC91nPpr8sSV+Akg6dNnNC7qy+yH+Ym0g9
    XbTsMVER7km/zZ2vrFHJZXfwtoWqHEcEUjsxmlfl2/iLluIIOB+4h72xikK1aN1v
    gkVYJAXJDyZcLZxE9WlozS1FoS8VR/+DKtJQR6JY+BXYpQ==
    -----END CERTIFICATE-----

    filter_web_host10=
    os_date=Mar 28 2005
    cron_enable=1
    wl0_wds7_enable=0
    http_lanport=80
    wl_plcphdr=long
    filter_mac_grp1=
    wl_macmode=disabled
    ppp_service=
    ppp_redialperiod=30
    filter_mac_grp2=
    filter_mac_grp3=
    wan_domain=
    wan_hwname=
    wl0_key1=deadaa2bad
    wl_phytype=g
    filter_mac_grp4=
    wan_netmask=255.255.255.0
    lan_lease=86400
    wl0id=0x4320
    ca_key=-----BEGIN RSA PRIVATE KEY-----
    MIICXAIBAAKBgQDv64X2DFfyfy5/xdjzSCrUALFD/cPa7OddJ/pnct9voA/nIauL
    vB913sYQ7a1ASZvE90hm0mlHmeUqx74J8zSTcCYIcVmmBghYGbeGrzc75Ymr4Zvk
    aTbcqR99vodpHOEv8SDdcy4OGqco7Ke2xm1zAyrHhKlhM/noON4w3l2vwQIBAwKB
    gQCf8llOsuVMVMmqg+X3hXHiqyDX/oKR80ToxVGaTJT1FV/va8eyfWpOlIQLSR4q
    270t+jBEjEYvu+4chSlb93hhAFKvJt1AE/Z7X0tMsZxTH64q0TtALZhlrLLMXJAs
    YbCAv4GcnrrK+6Npsww7eknuV2/HtH2fxcwD+c3TXwJsqwJBAPjtT3ESpZ1HQJvo
    yZ4gqPPyOyuVdOEE6Ge1mVctHS4dhH6PcM/wsgH75kzY9fTB+CUaImYxSkQ4CRMG
    j96j3lECQQD2vLJF+yBKz15u3coGrBZCEjB8LY9DzVu+XbHcgglcOupTTwG1JSuf
    NiQTPGeaPJVa6PmPu6dHD9kvIuPxNi5xAkEApfOKS2HDvi+AZ/CGaWsbTUwncmOj
    QK3wRSO7j3NoyWkC/wpLNUshVqfu3eX5TdalbhFsRCDcLXqwt1m1PxfpiwJBAKR9
    zC6natyKPvST3ARyuYFhdageX4KI59Q+dpMBW5LR8YzfVnjDcmokGAzS77woY5Hw
    pl/Sb4S1O3TB7Ut5dEsCQHwaPC6uAmv1SFDKB6gwX8QJewu9fUXXf24rHVH+CIka
    dqguhTNrnuoSpmfQs0WE5MrBCsz7a2Qy5kXj9wlAgB4=
    -----END RSA PRIVATE KEY-----

    wl0_key2=
    pppoe_static_ip=
    filter_mac_grp5=
    wl_lazywds=0
    wl0_key3=
    filter_mac_grp6=
    wl0_key4=
    filter_mac_grp7=
    filter_mac_grp8=
    filter_client0=
    wshaper_nopriohostdst=
    filter_mac_grp9=
    filter_maclist=
    pptp_pass=1
    pptp_get_ip=
    wl_auth_mode=disabled
    ppp_demand=0
    wl_wds10_enable=0
    mtu_enable=0
    ppp_keepalive=0
    wl0_br1_nat=0
    block_activex=0
    d11g_rts=2347
    sh_interfaces=loc br0
    loc eth0
    loc eth2
    net wds0.2
    remote_mgt_https=0
    wl_wpa_psk=
    http_passwd=pce22766
    ag0=255
    wl0_br1_enable=0
    block_wan=1
    lan_stp=0
    skip_amd_check=0
    wl_mode=ap
    artemis_enable=0
    wl0_plcphdr=long
    wl0_rate=0
    wl0_closed=0
    bird_ospf=Please read the BIRD setup instructions at http://bird.network.cz/bird.html
    wl_wpa_gtk_rekey=3600
    wl_afterburner_override=-1
    d11g_rateset=default
    wl0_macmode=disabled
    wl0_radioids=BCM2050
    wl0_phytype=g
    wl0gpio2=0
    dr_wan_rx=0
    filter_tod_buf1=
    wl0_lazywds=0
    wl0gpio3=0
    block_proxy=0
    filter_tod_buf2=
    filter_tod_buf3=
    filter_tod_buf4=
    boardflags2=0
    pptpd_rip=
    filter_tod_buf5=
    http_client_ip=10.4.5.10
    dr_lan_tx=0
    filter_tod_buf6=
    wl_wds5_enable=0
    wl0_antdiv=3
    filter_tod_buf7=
    filter_tod10=
    lan_hwaddr=00:0F:66:A5:A2:D3
    apwatchdog_interval=15
    filter_tod_buf8=
    wan_dns=
    http_client_mac=00:00:39:D0:66:91
    filter_tod_buf9=
    action_service=
    wl_dtim=1
    wl_ssid=PCE
    wl0_wpa_psk=
    artemis_provisioned=0
    wl0_wds2_enable=0
    d11g_bcn=100
    wl0_mac_list=
    wl_passphrase=
    daylight_time=1
    flash_type=Intel 28F640J3 4Mx16
    security_mode=disabled
    dhcp_wins=wan
    bcm4712_firmware_version=v1.50.0
    multicast_pass=1
    filter_tod_buf10=
    os_server=
    wl0_wds8_enable=0
    pppoe_static=0
    hb_server_domain=
    wl_key1=deadaa2bad
    wan_proto=dhcp
    wl_key2=
    wl0_unit=0
    wl_key3=
    wl_country_code=AU
    wl_key4=
    wshaper_noprioportsrc=
    ddns_cache=
    wl_hwaddr=
    aol_block_traffic1=0
    static_route_name=
    aol_block_traffic2=0
    wl_active_mac=
    wl_net_mode=mixed
    pa0itssit=62
    ntp_enable=1
    forward_port=
    wshaper_dev=WAN
    d11g_frag=2346
    wl0_wds=
    filter_mac_grp10=
    wl_rate=0
    ppp_static_ip=
    sh_policy=loc net ACCEPT
    net all DROP info
    all all REJECT info
    artemis_SVCGLOB=
    block_java=0
    log_level=0
    cctl=0
    telnetd_enable=0
    ntp_server=
    ct_modules=
    wan_hwaddr=00:0F:66:A5:A2:D4
    lan_ifnames=vlan0 eth1 eth2 eth3
    wl_macmode1=disabled
    pppoe_ifname=
    sshd_dss_host_key=-----BEGIN DSA PRIVATE KEY-----
    MIIBuwIBAAKBgQD1seconlMySOCPU0HJzRsKr9qtaGd/sK2vqdAr36opM6nrAGgx
    4AIOUhKJ2/9C8iKwAgdLpm70rZXcxbJwGICXhQ5rrDTKzlyI2f23XtZrKWWU3Vfb
    s91gblHckFkuw/Z7hT8j4nOO7JH1vgevv/ak+XB0ORS50w0HZCi4i5z9qQIVAKIP
    /UKm0Mlov0VenfrDoYH31xxJAoGAeZrVVAvZW2i8rvzWj/b0IoHO1kzrkyS3/lGn
    wkqIioWJe7GewcpZo/MT+7Jr1gQC+GXfHnCdlUyNuhsDvfvtQR2HpiCNXnkoQGbv
    wSQdfAwmBgqflPsVb9JnCB/SNGv7V/JRcp0qCH2r9L2edRC6gVQ4+kLxkW9P4Hbg
    OtWbjCkCgYBJzYBNO6M/BXEXFgg274SlIcZUBFrcsD+h4Rv1kKIs8NG4IOnDN3jw
    Bpj+DkitiQA+sZfThLE0Ow2t2WdYSGKWUlnZNu98ir96sLxyf1lWq8/l1zxSj2Oo
    7lX1AZTtCrErq8cStORqjFWrRFPeBJjPmT6c2YjS/+tdA5DW460b+QIVAKtK4Kzk
    MI8IFPwSap7wkx7yoKcA
    -----END DSA PRIVATE KEY-----

    wl0_mac_deny=
    wl0_radius_port=1812
    wl0_auth=0
    wl0_radius_ipaddr=10.4.5.1
    httpd_enable=1
    sshd_port=22
    pppoe_service=
    wshaper_noprioportdst=
    wl_country=Japan
    wl_ofdm= 0

    pa0maxpwr=0x48
    wl_wds6_enable=0
    traceroute_ip=
    ddns_change=
    remote_management=0
    wan_ifnames=vlan1
    block_loopback=0
    wl_rateset=default
    wl0_wds3_enable=0
    peap_mode=-E
    wl_wep_bit=64
    ppp_mru=1500
    wl_radius_key=thisPEAP
    filter_port_grp1=
    lan_proto=static
    os_name=linux
    clkfreq=200
    lan_ipaddr=10.4.5.1
    filter_port_grp2=
    vlan1hwname=et0
    aa0=3
    wl0_wds9_enable=0
    ddns_passwd_2=
    filter_port_grp10=
    filter_port_grp3=
    dr_wan_tx=0
    wl_unit=0
    filter_port_grp4=
    filter_id=1
    wl0_phytypes=g
    firmware_version=Satori-4.0 v2.07.1.7sv
    filter_port_grp5=
    wl0_frag=2346
    d11g_channel=11
    wl0_wep=off
    filter_port_grp6=
    router_disable=0
    ddns_username=
    filter_port_grp7=
    syslogd_enable=0
    ddns_passwd=
    pppoe_passwd=
    filter_port_grp8=
    filter_port_grp9=
    ppp_ac=
    log_enable=0
    sdram_config=0x0022
    filter_web_url10=
    wl0_country=Japan
    wl_atten_bb=3
    dmz_ipaddr=0
    vlan1ports=0 5
    security_mode_last=
    wl_wds=
    rc_startup=
    sshd_passwd_auth=1
    ddns_hostname_2=
    scratch=a0180000
    sshd_enable=1
    ccode=0
    wl0_rateset=default
    peap_config="usersfile"="/tmp/peapd/peapusers"
    "shared_key"="password"
    "private_key"="/tmp/cert/.private/pkey.pem"
    "certificate"="/tmp/cert/cert.crt"
    "ca_private_key"="/tmp/cert/.private/cakey.pem"
    "ca_certificate"="/tmp/cert/cacert.crt"
    "mode"="embed"
    wl0_wep_bit=64
    pppoe_idletime=5
    ping_times=
    wan_primary=1
    lan_ifname=br0
    filter_services=$NAME:003:DNS$PROT:003:udp$PORT:005:53:53<>$NAME:004:ping$PROT:004:icmp$PORT:003:0:0<>$NAME:004:HTTP$PROT:003:tcp$PORT:005:80:80<>$NAME:005:HTTPS$PROT:003:tcp$PORT:007:443:443<>$NAME:003:FTP$PROT:003:tcp$PORT:005:21:21<>$NAME:004:pOP3$PROT:003:tcp$PORT:007:110:110<>$NAME:004:IMAP$PROT:003:tcp$PORT:007:143:143<>$NAME:004:SMTP$PROT:003:tcp$PORT:005:25:25<>$NAME:004:NNTP$PROT:003:tcp$PORT:007:119:119<>$NAME:006:Telnet$PROT:003:tcp$PORT:005:23:23<>$NAME:004:SNMP$PROT:003:udp$PORT:007:161:161<>$NAME:004:TFTP$PROT:003:udp$PORT:005:69:69<>$NAME:003:IKE$PROT:003:udp$PORT:007:500:500<>
    boardflags=0x0388
    wl0_afterburner_override=-1
    sdram_refresh=0x0000
    dhcp_domain=wan
    wl_auth=0
    wl_wep_last=
    sdram_ncdl=0x20321
    wl_cck= 17
    block_cookie=0
    resetbutton_enable=1
    wl_wds1_enable=0
    wl_frameburst=off
    rc_firewall=
    wl_wds7_enable=0
    dhcp_num=50
    filter_web_url1=
    wan_ipaddr=172.16.1.132
    wl0_passphrase=
    filter_web_url2=
    filter_web_url3=
    wl0_rts=2347
    filter_web_url4=
    filter_web_url5=
    wl_ifname=
    filter_web_url6=
    wan_wins=
    ntp_mode=auto
    wl_wep=off
    filter_web_url7=
    wl0_wds4_enable=0
    l2tp_pass=1
    filter_web_url8=
    pppoe_username=
    filter_web_url9=
    os_version=3.50.21.10
    wl_gmode_protection=off
    wl0_wpa_gtk_rekey=3600
    sshd_rsa_host_key=-----BEGIN RSA PRIVATE KEY-----
    MIICZAIBAAKBgwCQf/Eyjc6d6AEtJF9mMZP1oetmRMkiiB9hxgPj68mV5/ddGZ7x
    BznY8r93bChbJ71kLjGaRfuQ0MyIOmx2qr+gRFuu+CStvEokE+07SerGijuocpU8
    GOHEQ79X7x2BJb1aybkUyToZpKUBUASsmWRbFH5Q1Mx6zSAieP61T6S6BVJdAgMB
    AAECgYIREqzYQPJgAeDcXpHPAfNDcHrfEygt+6YJkrCJpiWj9UvAJPN8nafzaYBp
    3Hj1hup/rbLlUXjPEXyOaVNrafKePYbe9UqBNpf4aSXrVQuS3nvNQA6U4bVRtrBP
    2/bUFDtn7p3i4aaBNbi13iStT5GwY9M+dVZqSs3vCGwDL36kTutZAkIA725UOvXD
    REWj3KqQXDzpIrjppJ0R68+dQRBxTBzn252UkjYB00NrWx97HmLsSWrhuXWEvI55
    7YRCL03NhdxkiVMCQgCaf9jT7Q3P4XE+dbGBDTsjWPsuZEH6fjoIA5kD4oVEDmHE
    itHvb+0vfcMBuWQj6Pwv1Ox/ou8awOqD/q2XDxRPjwJBTgdYr/ZT8rX3VvzHGyhG
    mihFDH6bzovUpdWj9rgc37eVKaksIxt/qyyxRQ/cDXklovknjwOnvL4zi5MBfbR7
    lz0CQVgckYxLpZTo/ayhcpom8ZM3LAlJJFe3pWDsrFeK2HX3vcpZYWEsdBihoJVb
    JcFVHn4o8LfaNIMNgrHEjTuZXfwBAkF+gwzlAv9CGhPuYSBY+GDg19sfv1xKSeQ+
    cWQbf6qciTN1XQj8dKdArjifS4tV4i+P3PwvLa+DpqoAztLn1F8Usw==
    -----END RSA PRIVATE KEY-----

    mac_clone_enable=0
    ppp_get_srv=
    wl_frag=2346
    wan_mtu=1500
    wl_wep_gen=
    wl0_key=1
    wl0_active_mac=
    wl_maclist=
    filter_macmode=deny
    txant=3
    console_loglevel=1
    et0phyaddr=30
    wl_atten_radio=4
    time_zone=-05 2 1
    dnsmasq_options=
    wan_get_domain=pcevolution.com
    wan_ifname=vlan1
    sshd_authorized_keys=
    wl_radioids=
    wan_hostname=
    wl0_radio=1
    wl_corerev=
    ppp_mtu=1500
    sh_zones=net Net Internet
    loc Local Local Networks
    dmz DMZ Dmz Zone
    ddns_interval=60
    zebra_enable=1
    ca_certificate=-----BEGIN CERTIFICATE-----
    MIIChTCCAe6gAwIBAgIBATANBgkqhkiG9w0BAQUFADB0MQswCQYDVQQGEwJVUzEL
    MAkGA1UECBMCR0ExEDAOBgNVBAcTB0F0bGFudGExETAPBgNVBAoTCHRpbnlQRUFQ
    MR4wHAYDVQQLExVDZXJ0aWZpY2F0ZSBBdXRob3JpdHkxEzARBgNVBAMTClBDRXNh
    bnNmaWwwHhcNMDUwMzMxMjAxOTQwWhcNMTkwMjExMTM1MTI0WjB0MQswCQYDVQQG
    EwJVUzELMAkGA1UECBMCR0ExEDAOBgNVBAcTB0F0bGFudGExETAPBgNVBAoTCHRp
    bnlQRUFQMR4wHAYDVQQLExVDZXJ0aWZpY2F0ZSBBdXRob3JpdHkxEzARBgNVBAMT
    ClBDRXNhbnNmaWwwgZ0wDQYJKoZIhvcNAQEBBQADgYsAMIGHAoGBAO/rhfYMV/J/
    Ln/F2PNIKtQAsUP9w9rs510n+mdy32+gD+chq4u8H3XexhDtrUBJm8T3SGbSaUeZ
    5SrHvgnzNJNwJghxWaYGCFgZt4avNzvliavhm+RpNtypH32+h2kc4S/xIN1zLg4a
    pyjsp7bGbXMDKseEqWEz+eg43jDeXa/BAgEDoykwJzAMBgNVHRMEBTADAQH/MBcG
    A1UdEQQQMA6CDHRpbnlwZWFwLmNvbTANBgkqhkiG9w0BAQUFAAOBgQBJiReInNX/
    +sSIYTHae4usM6qLgOIZlpBz9I503CxbbWZKAzdyrx3iIM42brxO1kSAvbSsA4sa
    NIPVcSy2UpO2SAwFF2xhNTIqPia8MBukyH8S7NYWpF8yefU9M68AWCeA+qCP3Bh3
    vNI72HTRtOY67IiGDRFLFyA8ayI+7g9vXw==
    -----END CERTIFICATE-----

    wl_channel=11
    wl0_bcn=100
    pptpd_auth=
    wl_radio=1
    ppp_static=0
    filter_tod1=
    wl0_hwaddr=00:0F:66:A5:A2:D5
    filter_tod2=
    filter_tod3=
    wl0_wep_gen=
    filter_tod4=
    ddns_passwd_buf=
    wk_mode=gateway
    wl0_gmode_protection=off
    filter_tod5=
    pa0b0=0x170c
    wl0_maclist=
    filter_tod6=
    pa0b1=0xfa24
    rc_shutdown=
    filter_tod7=
    pa0b2=0xfe70
    wl_rts=2347
    filter_tod8=
    sdram_init=0x0008
    wl_wds2_enable=0
    filter_tod9=
    lan_wins=
    aol_block_traffic=0
    vlan0hwname=et0
    wl_tssi_result= 17
    wl_mac_list=
    lan_hwnames=
    dl_ram_addr=a0001000
    dhcpd_options=
    pppoe_demand=0
    wl_wds8_enable=0
    local_dns=0
    wl0_radius_key=thisPEAP
    filter_dport_grp10=
    ddns_username_buf=
    wl0_corerev=7
    wl_key=1
    wl0_channel=11
    wl0_wds5_enable=0
    dr_setting=0
    upnp_enable=0
    wl0_wds10_enable=0
    pptpd_lip=
    ddns_status=
    filter_rule10=
    wl_atten_ctl=48
    wl0_auth_mode=disabled
    wl_closed=0
    txpwr=28
    boot_ver=v3.1
    autofw_port0=
    boardnum=42
    def_hwaddr=00:00:00:00:00:00
    wl_delay=1
    wl_bcn=100
    wl_wep_buf=:deadaa2bad::::1
    filter_dport_grp1=
    wl_antdiv=-1
    filter_dport_grp2=
    size: 14367 bytes (18401 left)
    (none):[~]# exit
     
  6. tinyPEAP

    tinyPEAP Network Guru Member

    I just placed updated version which should resolve your problem.
    Try that one and see if it works.

    I would recommend running 'Factory Defaults' to ensure
    that no bad data is left in your nvram.

    -tak
    tinyPEAP Development Team
     

Share This Page