1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

WRT54GS Static IP

Discussion in 'Cisco/Linksys Wireless Routers' started by turbonow, Feb 18, 2005.

  1. turbonow

    turbonow Network Guru Member

    So now i bought myself a Linksys WRT54GS, before i got a Dlink 604 router and in that you could reserve a IP from the dhcp to a specific MAC adress.. But the WRT54GS dont seem to want that, so now im wondering if any here can help me with a hacked firmware or something

    /turbonow
     
  2. Toxic

    Toxic Administrator Staff Member

    try mac cloning in the WRT54G.
     
  3. turbonow

    turbonow Network Guru Member

    Yeah but i dont want the linksys to have an static ip, i want it to give my computer a static ip
     
  4. Toxic

    Toxic Administrator Staff Member

    just give them all static IPs
     
  5. linksysonline

    linksysonline Network Guru Member

    Sveasoft Firmware allows you to be set to DHCP with static IP given out. All you have to do is set the MAC address and IP inside the router and it will assign the same IP to the PC everytime the PC looks for an IP address.
    DD-WRT obvousily does the same thing...
     
  6. turbonow

    turbonow Network Guru Member

    Okai, is it a good firmware, is it compatible with my router?
     
  7. linksysonline

    linksysonline Network Guru Member

    What version of the WRT54GS do you have?
     
  8. turbonow

    turbonow Network Guru Member

    My serial number starts with CGN1
     
  9. turbonow

    turbonow Network Guru Member

    Therefore it is a V 1.0?
     
  10. Toxic

    Toxic Administrator Staff Member

    yes by the looks of other postings here it does seem to be v1.0
     
  11. turbonow

    turbonow Network Guru Member

    So what firmware should i run then?
     
  12. turbonow

    turbonow Network Guru Member

    Im thinking about to blast in the new version of HyperWRT?

    Sounds Good, Is Static IP included in it?
     
  13. linksysonline

    linksysonline Network Guru Member

  14. Toxic

    Toxic Administrator Staff Member

    use the latest HyperWRT firmware. this will support ALL the latest models of WRT54G/GS units
     
  15. turbonow

    turbonow Network Guru Member

    Static IP is DONT included in HYPERWRT. But i like HyperWRT. Shall try to blast in sveasoft today to and see
     
  16. Toxic

    Toxic Administrator Staff Member

    no static ip is NOT included in hyperwrt. but what is wrong with setting up each PC with a Static IP instead?
     
  17. turbonow

    turbonow Network Guru Member

    aaa, you got a point there, thanks
     
  18. turbonow

    turbonow Network Guru Member

    Yes it worked, thanks :D
     
  19. turbonow

    turbonow Network Guru Member

    Or no, i haved enough with problems with windows static ip.. So, can i run Sveasoft?
     
  20. linksysonline

    linksysonline Network Guru Member

    Yes, based on your router version you can run Sveasoft firmware...
     
  21. turbonow

    turbonow Network Guru Member

    Im going to upgrade in about 10 minutes, hopes it will work out

    But shall i run Satori or the other?
     

Share This Page